0
What else can I help you with?
What is function of 89s52 microcontroller?
The 89S52 has four different ports. Each one of the ports has eight input/output lines. The ports are used to output data.
Why external pull up resistor is needed at port 0 for AT89S52 microcontroller?
To limit the amount of current to the ports
How is a microcontroller programmed?
That depends on the specific microcontroller.
What is mean by pic in microcontroller?
The PIC is a specific architecture of microcontroller.
Why using pullup-resistors in 8051 microcontroller?
to determine the state condition of microcontroller's input when microcontroller is reading the input port
Why you do not use microcontroller in heavy machines. Why PLC we use?
Microcontroller having limited IO capacity and should not reliable in more changes in process.
What is function of 89s52 microcontroller?
The 89S52 has four different ports. Each one of the ports has eight input/output lines. The ports are used to output data.
What is the Different Between Microprocessor and Microcontroller?
The basic difference between the microprocessor and microcontroller is that we can interface a microcontroller directly means "for example we can directly connect a keyboard to microcontroller to any of its ports"....where as for microprocessor we can't interface directly...we require a circuit board since it requires ram,ic's.....etc.,! beyrojac mahinay
Why external pull up resistor is needed at port 0 for AT89S52 microcontroller?
To limit the amount of current to the ports
A preassigned combination of an IRQ and IO address is called what?
COM and LPT PORTS
What is IO PORTS?
I/O ports, short for Input/Output ports, are physical interfaces on a computer or device that allow the exchange of data with external devices. These ports can be used for connecting peripherals such as keyboards, mice, printers, and storage devices to a computer. There are different types of I/O ports, including USB, HDMI, Ethernet, and audio ports.
What is a 8051 Micro-controller?
An 8051 microcontroller is a popular 8-bit microcontroller that was first introduced by Intel in 1980. It is widely used in embedded systems due to its simple architecture, low cost, and ease of use. The 8051 microcontroller typically includes CPU, RAM, ROM, I/O ports, timers, and serial communication interfaces on a single chip.
How is a microcontroller programmed?
That depends on the specific microcontroller.
What is a IO Panel?
An Input/Output Panel, which can be found on either the front or back of your computer. This panel usually contains USB Ports and both audio- and microphone ports. In some cases there is a Firewire and/or eSATA connector as well.
Difference between Z86E04 microcontroller from PIC microcontroller?
x
What is mean by pic in microcontroller?
The PIC is a specific architecture of microcontroller.
What is the voltage of 8031 microcontroller?
The voltage of the 8031 microcontroller is 2.7V to 5.5V.
