that test indicates that you need to replace the starter motor.if no clicking in this test , you would replace solenoid first. but clicking indicates solenoid works,so replace starter motor
your battery is dead or the starter solenoid
Put a stethoscope or a plastic tube onto the solenoid, listen at it while a friend turns the starter. If solenoid clicks it is good. -Problem then is low battery or dud starter.
The starter solenoid is on the starter.The starter solenoid is on the starter.
Starter solenoid sticking. Replace the solenoid if it is external. If it is internal, then just replace thee starter. It will cost a little more but you will have a new starter and solenoid.
The starter relay or solenoid is probably the problem.
You need to replace the starter solenoid .
Bad starter, bad starter solenoid, or the problem might not be the starter at all.
The starter solenoid is on the starter.The starter solenoid is on the starter.
The problem is almost definitely your neutral safety switch. When you jump the solenoid you are bypassing it. The problem is your starter is going and needs replacement
The starter solenoid is built on the starter.The starter solenoid is built on the starter.
There is an electrical problem between the starter switch and the starter solenoid. The most likely cause is a loose connection at the solenoid or the fusable link has melted.
It is possible that a DTC 10 on the Toyota Camry is a problem with the starter. The starter solenoid, wiring, or the starter itself could be the problem.