If the 2007 Chrysler Sebring 2.71 is not starting without stater fluid in the air filter is could indicate a faulty starter or the air filer may need replacing.
If the Chrysler Sebring won't start after going through a puddle, the problem is probably that the starter relay switch got wet. This is not a common thing but if the starter relay was bad to begin with, moisture will make the problem worse. The starter relay is located on the starter.
It is on the starter.It is on the starter.
It is part of the starter.
Starter, on the starter. Transmission, on or in the transmission.
Yes.
The starter has failed.
The starter solenoid is built on the starter.
The 2004 Chrysler Sebring starter fuse can be found in the fuse box. The location of the fuse can be found on the inside cover of the fuse box.
Remove the positive battery cable from your 2001 Chrysler Sebring battery. Remove the cables from the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
The starter is on the front of the engine, behind the motor mount.
The starter solenoid is on the starter. The transmission solenoid is on the front of the trans.
A failed starter is a likely cause.