I do not know about the SL1, but often there is a relay for high current circuits such as headlights. You could check for proper operation of the high-beam headlight switch at the excitation terminal of the relay and check for headlight circuit energy at the output on the relay.
Gas is not getting into the carburetor because no Saturn made ever had one.
Fill your coolant to the level that it should be at. If it still comes on when the coolant is at its proper area, then it is an improper sensor. You will need to have it replaced immediately to reset the sensor.
Voltage Regulator?
Check the fuses, check the relay and then check the fan motor.
it doesn't work!!
which light is blinking??need more info
You need to reset the light by using diagnostic equipment even though the part was replaced the fault code will still be stored in the ECU memory.
i replaced the fuse on my 2006 chey colrado licence plate and it still doesnt work
My delonghi magnifica doesnt froth milk properly I have replaced the o-rings but still not working
I would look for vacuum leaks.
Check the fluid level in the Saturn. Check the water pump and thermostat for failure. If they are not working the engine will overheat and the light will blink.
I have a 2006 Saturn ion. The reduced engine power light came on and the car still runs but will not accelerate and only goes 30mph