0
Identify 3 locations should place M9 on your protective clothing?
Wiki User
∙ 14y ago
Upper Arms of jacket Above the ankles of trousers Lower Arms of jacket
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Identify the three locations where you should place m9 paper on your protective clothing?
upper arms of jacket lower arms of jacket above the ankles of trousers
When should you wear protective clothing?
when u are on a motorbike..
Why should you wear protective clothing?
You should wear protective clothing because you could easily hurt yourself e.g: builders have to wear helmets to protect them from anything falling on them.
What is the measure should be taken to prevent needle stick injuries?
wear protective clothing
Does an electric air soft gun hurt?
Yes that's why you should wear protective clothing.
Should you wear protective clothing while cleaning a house that has bed bugs?
Sleeping with or without clothing generally will not make a difference, though sleeping with clothing can help to lessen the bites.
Identify three times when you should clean your protective mask?
proir to deployment, upon issue, and proir to turn in
Identify three locations where you should place m9 paper?
Inside the protective mask carrier, as it can be used to detect chemical agents that may have penetrated the mask. Around the perimeter of a vehicle or building to quickly determine if any chemical contamination is present. In a first aid kit to use as a quick screening tool for chemical contamination on skin or clothing in an emergency situation.
How do you wash acid protective clothing correctly?
It would be better that breathable acid protective clothing is washed by neutral detergent, not mixed with other clothing, wash by hand or soft washing of machine, do not brush by hair brush, do not beat, do not knead strong by hand, The temperature of washing water should be under 40 degree, the washing time should be as short as possible, but must be have enough time to wash to remove residual detergents. Do not use bleaching power and organic solvent to clean, avoid reduce acid protective function and color fastness of fabric. Acid protective clothing should be natural dry in air, not exposure under the sun. When the clothing is half-dry, it should be ironed under 115 degree, so it will be avoid reducing of acid proof function. Non-breathable acid protective clothing is washed by plenty of water, can be brush lightly, but do not use hot water, organic solvent, avoid sun exposure, heat drying, whole very hot, in order to prevent aging, cracking, swelling and loss protection performance. By YULONG tex
Identify three times when protective mask should be clean?
prior to deployment prior to turn in to logistics upon issue and every 6 months
What is the requirement about the style and construction for acid resistant clothing?
1, style A, breathable acid resistant clothing.....used for mild acid polluted places, following is the suitable style: a, suit( tight collar, tight cuffs, tight hem,trousers are straight canister) b, unlined long gown B, impermeability acid resistant clothing.......used for severe acid pollution places, next is the suitable style: a, coverall( tight collar, tight cuff, tight bottom) b, suit c, apron Remark: each part of the safety clothing should be strict, reasonable, avoid the acid and alkali intrusion. 2, construction The construction of the protective clothing should consider the collocation with other protective equipment, for example, the sleeve and the protective glove, trousers and the protective shoot, the juncture should be strict, reasonable, avoid the acid and alkali intrusion. In addition, acid resistant clothing should not have the obvious pocket, but inside pocket is no problem. Attachment should be easy to connect and take off, the material should be resistant to corrosion resistance.
What should you do to stay safe while biking?
* Drive safely * Obey traffic rules * Maintain the cycle in good condition * Wear protective clothing
