overcome pain ,and fear
If you were trying to move a huge block of stone, the forces of friction would be applied against you. To get the stone in motion, you must overcome static friction, the friction force that acts on objects that are not moving and is always working in the direction opposite of your applied force. Then, to keep it in motion, you must overcome sliding friction, which, though it takes effort to keep moving a stone, is substantially less than the effort to get a stone into motion originally.
Friction is encompassed by Newton's laws, as opposed to operating out side of it. If a block slides down a wedge, there is friction acting against the block up the slope. From the wedge's perspective, the block produces a frictional force against it, trying to drag it downwards along the slope.
less friction
Friction acts towards the nail in the block when you are pulling it out. In other words, it will try to keep the nail in the block and not let it be pulled out by the hammer.
The coefficient of friction is the same in this case.
If you were trying to move a huge block of stone, the forces of friction would be applied against you. To get the stone in motion, you must overcome static friction, the friction force that acts on objects that are not moving and is always working in the direction opposite of your applied force. Then, to keep it in motion, you must overcome sliding friction, which, though it takes effort to keep moving a stone, is substantially less than the effort to get a stone into motion originally.
No, It does not depends on weight of block because this weight of block is being balanced by normal force. So by increasing weight of block, there is no effect on coefficient of friction.
Friction is encompassed by Newton's laws, as opposed to operating out side of it. If a block slides down a wedge, there is friction acting against the block up the slope. From the wedge's perspective, the block produces a frictional force against it, trying to drag it downwards along the slope.
In order for the block to move the force applied has to be greater than the maximum force of static friction. F > fs fs = coefficient of friction * normal force = .65 * 36N // you can use the weight for the normal force since the block is being supported = 23.4N Since applied force of 42N is greater than the 23.4N due to friction, the block will start sliding, where kinetic friction will act on the block.
less friction
Static friction does not apply when the block is already moving. Without friction, the force on the block parallel to the surface of the incline is Fg*sin(angle), so the acceleration without friction is 9.8* sin(30) = 9.8 * (1/2) = 4.9 Since it is accelerating at 3.2, friction is slowing down the block by (4.9-3.2 = 1.7). The coefficient of kinetic friction is (1.7/4.9) = 0.346939
Friction acts towards the nail in the block when you are pulling it out. In other words, it will try to keep the nail in the block and not let it be pulled out by the hammer.
at rest it is static friction while on wheels it is rolling friction
The coefficient of friction is the same in this case.
Friction is generally described as either sliding or rolling friction. You could devise any number of instruments to measure it. If you moved a given surface area (say a block) across another surface under pressure from above (say weight) then you could measure the force needed to accelerate the block to a certain velocity. You need a stopwatch, a spring balance (to measure force) and some maths. JCF
Friction is the resistance to movement of an object pressing/resting/moving on a surface. It's not intuitively obvious but the standing still friction and moving friction are different. Assume you have a block of wood resting on a tabletop. The amount of force required to make the block begin to move (static friction) is greater than the force required to keep it moving (kinetic friction) after it has begun to move.
first it will have static friction because the object isn't moving.once it rolls it will have rolling friction.