A little over 36"
@ 40" or so depending on LOP and Barrel length.
That would depend on the make and model of the shotgun in question,and the length of the barrel/barrels that came with the shotgun.
18 inches and a total overall length of at least 26 inches, just like in the rest of the US.
A barrel no shorter than 18 inches in length. The overal total length of the firearm cannnot be less than 26 inches from the tip of the muzzle to the end of the buttstock.
It depends on model, guage, barrel length and other considerations, but most A5's will be between 6 3/4 lbs to 9lbs.
50-600 USD or so
Same as the federal law. Barrel length must be a minimum of 18 inches, and the total overall length must be 26 inches minimum. Anything less than that, and you must first obtain an NFA Class II permit.
Determining value invloves many different pieces of information which you did not provide. Condition is usually the most important. The type of finish, features, wood used in the stock, what the barrel is choked, barrel length, gauge, accessories, any engraving, presence of origianal paper work and box also come into play. Total production is a factor too. Without a detailed description, 100-1000 USD, maybe.
Determining value invloves many different pieces of information which you did not provide. Condition is usually the most important. The type of finish, features, wood used in the stock, what the barrel(s) is/are choked, barrel length, gauge, accessories, any engraving, presence of origianal paper work and box also come into play. Total production is a factor too. Without a detailed description, 100-1000 USD, maybe.
Determining value invloves many different pieces of information which you did not provide. Condition is usually the most important. The type of finish, features, wood used in the stock, what the barrel(s) is/are choked, barrel length, gauge, accessories, any engraving, presence of origianal paper work and box also come into play. Total production is a factor too. Without a detailed description, 100-1000 USD, maybe.
Your question is poorly worded and there is no way to tell what you want to know.
the barrel has to be at least 18 inches the gun must be a total of 29 inches watch your self with this it could get you in a lot of trouble. and yes anyone can do this if you want it to be shorter you will have to pay a 200$ tax to the ATF and classify it as an sbs or short barrled shotgun