Want this question answered?
All the power absorbed by the heating element and the connecting wire is converted into heat, leading to the 100% efficiency figure.
the element has a open in it !
because of its covering.
The heating element is on the bottom in the back, if you pull the front base panel off, you can look back and see the element against the back of the dryer. You can undo two screws and pull the element out. "MAKE SURE TO UNPLUG THE DRYER FIRST SO YOU DO NOT GET SHOCKED" Jeremy
That would most likely be a nickel and chrome alloy. Light bulbs use tungsten.
The connecting wire will be thicker and made of a low resistance material to allow electricity to flow with minimal losses. The element requires a thinner wire with higher resistivity which causes it to heat when electricity passes through.
All the power absorbed by the heating element and the connecting wire is converted into heat, leading to the 100% efficiency figure.
the element has a open in it !
Yes heating element is burner assembly.
Positive temperature coefficient heating element. Resistivity grow larger with higher temperatures so the heating element should be self regulating.
we wont use copper as a heating element because it expands on heating and it can effect the thermostat
where is the heating element on a kenmore series 400
limitation of heating element
the heating element is gone out
The wire in the cord has much lower resistance than the heating element. The heating element is a resistive or resistance heating element. Resistance in the quality of a substance or material that causes it to limit current flow, and it get heated up in the process. The heating element has all but the smallest fraction of the resistance in the circuit, so the heat, that thermal energy that get the water hot, is generated by the resistance of the heating element.
The wire in the cord has much lower resistance than the heating element. The heating element is a resistive or resistance heating element. Resistance in the quality of a substance or material that causes it to limit current flow, and it get heated up in the process. The heating element has all but the smallest fraction of the resistance in the circuit, so the heat, that thermal energy that get the water hot, is generated by the resistance of the heating element.
Heating device or heating element.