answersLogoWhite

0

be discharged into a water reservoir or container.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What hose type is used to transfer water to the pump intake from a pressurized source only?

hard intake hose


What is the name of the coolant used in a pressurized water reactor?

The coolant used in a pressurized water reactor is typically purified water. This water is pressurized to prevent it from boiling and is circulated through the reactor core to remove heat generated during the nuclear reaction.


In a pressurized water-reactor the primary cooling water?

Boils in the core and is used to turn the turbine


When should Drylok not be used for waterproofing?

Drylok should not be used for waterproofing in areas where there is constant water pressure or where the source of water infiltration cannot be controlled.


What is the energy transfer for a steam engine?

The energy source, usually coal is burned. The heat that is produced from this process is then used to boil water which becomes pressurized. The water vapor pressure then moves turbines to translate from kinetic to electric energy.


In a pressurized water reactor the primary cooling water is?

In a pressurized water reactor, the primary cooling water is kept under high pressure to prevent it from boiling at normal operating temperatures. This pressurized water flows through the reactor core to transfer heat from the nuclear fuel to a secondary system, where the heat is used to generate steam for electricity production.


What is a dry pipe sprinkler system?

This system is used in a non heated space. Parking garages, warehouses, carports and so on. The system has pressurized air in the pipeing from the sprinlker head to the water source. Water does not enter the system untell a sprinkler head is set off.


Why forebay is used in hydroelectri power plant?

Head race tunnel are Non pressurized tunnels and Penstock is the tunnel bearing pressure. As there is the breakdown in the Power and the water is stopped entering through the turbines, the pressurized flow of water in the penstock creates hammer effect and goes back to the HRT. So, keeping Fore bay in between HRT and Penstock helps reducing pressurized water to create Water Hammers. Hence, to reduce the back water pressure effect, the Fore bay is used in the Hydro power Plant.


How hydrophore tank works in water system?

A hydrophore tank is a pressurized water tank that is used to maintain water pressure in a water system. It works by utilizing a pump to fill the tank with water, which is then pressurized using air. When the water pressure drops below a certain level, the pump kicks in to refill the tank and maintain consistent water pressure throughout the system.


How does a fire hose stop a fire?

A fire hose is used to stop a fire by its ability to transfer water. The hose will deliver water from a source through a nozzle and onto the flames. We typically find a hose connected to a pump, which provides water under pressure. The hose will deliver that pressurized water to the nozzle, and a firefighter can direct the stream as needed.


What water source did the Cree use?

i think they used the water source by the lakes and rivers


What material is used as heat conductor in nuclear power plant?

It depends. Pressurised water is used in pressurized water reactors (PWR), but molten salt (maybe fluoride?) reactors are said to be better.