Want this question answered?
Check the manual that came with the stove. The elements lift and slide out in the same motion in a direction 180 degrees from where the wires are connect to the element.
there are 3 elements. internal element, external element and situational element
Signal Element Versus Data Element: Let us distinguish between a data element and a signal element. In data communications, our goal is to send data elements. A data element is the smallest entity that can represent a piece of information: This is the bit. In digital data communications, a signal element carries data elements. A signal element is the shortest unit (time wise) of a digital signal. In other words, data elements are what we need to send; signal elements are what we can send. Data elements are being carried; signal elements are the carriers.
is the element in periodic table of elements
Rocks are usually not elements, but they contain elements.
in the series circuit elements are one behind the other ie +ve terminal of one element is connected to the -ve of other element of the circuit whenever in parallel circuits the elements are parallely connect ie all +ve terminal are connected at a point and all -ve terminals of the elements are connected at a point.
Depends. What did you want to measure? If it's voltage drop across the incandescent element, then you had better hook up your infinite resistance voltmeter in parallel with the lamp.
Carbon is an element. Elements are atoms at its simplest. A molecule is a collection of atoms connected by an electric charge.
In a series circuit the current flow in each element is equal but voltage across the each element is differ. In a parallel circuit the voltage across the each element is equal but current flow in each element is differ.
Series circuit: elements are connected one after the other; the current (the electrons, or other charge carriers) has to pass through each of the elements in turn. Parallel circuit: elements are connected in such a way that part of the current will pass through one circuit element, part through the other.
They're connected in parallel, this is so that everything connected to the circuits will receive the same voltage. Also, if everything was connected in series, if one of the components died, everything would be dead (think of christmas lights)
In a series type circuit, the electric current passes through each element of the circuit (light bulb or whatever) in sequence; it does not reach any element until it has first passed through all the earlier elements. In a parallel type circuit, every element of the circuit receives its electric current independently. A separate wire connects each element to the source of the current rather than to the previous element of the circuit.
Because it is simple phenomenon of electricity everything(resistance,capacitor,inductor) connected in parallel holds the same voltage across the each parallel element.
Fuse is a circuit element which disconnects the electrical current from the mains"supply" feeding the load when a condition of fault "short circuit " occurs. one behaviour of electric current that it flows undivided in circuit elements connected in series and is divided when flows in circuit elements connected in parallel. so in order to protect a circuit fuse MUST be connected in series to cut/disconnect the faulty current in a safe/short time. if u connect a fuse in parallel to a component then u will be shorting that component and the component will not function ;because the fuse is a thin wire with a negligible resistance and electrical current flows in the most easy "less resistive" component. besides a short circuit will happen immediatly because u connectthe supply to the neutral! hope that helps.
In computing, a pipeline is a set of data processing elements connected in series, so that the output of one element is the input of the next one. The elements of a pipeline are often executed in parallel or in time-sliced fashion; in that case, some amount of buffer storage is often inserted between elements. Baraan Khattak.
If two or more circuit elements are connected in series, the current must pass through each of them in turn. If two or more circuit elements are connected in parallel, that means there is a "fork in the road". In this case, part of the current will pass through one element, and part, through another one.
An electric fan is not a chemical category at all, but an article of manufacture that can contain many chemical compounds and/or elements.