Want this question answered?
The nugget of gold has a volume of 2.6 cm3, and the nugget of pyrite has a volume of 10 cm3.
It depends. Pyrite (or "fool's gold) is a mineral that can contain 0.25 percent or more of gold. If a pyrite sample contains this amount, and assuming the price of gold is $1500 per troy ounce, then one ton of pyrite would be worth a little over $100,000.
Iron Pyrite - which is a sulphide mineral - FeS2.
Gold miners use a type of strainer to separate dirt from gold. They dip it into water because the dirt will rinse threw the strainer.
One way would be to perform a streak test by sliding the sample across an unglazed tile with a little bit of pressure. Gold will have a gold colored streak and pyrite will have a greenish black streak. After exposure to flame, pyrite will have a slight sulfur smell which gold will not. == == == ==
The nugget of gold has a volume of 2.6 cm3, and the nugget of pyrite has a volume of 10 cm3.
Mostly, yes. Gold has a deep yellow colour, while pyrite often has a silvery haze over it. If you have a large sample, it's even easier, as pyrite forms perfect cubic crystals.
It depends. Pyrite (or "fool's gold) is a mineral that can contain 0.25 percent or more of gold. If a pyrite sample contains this amount, and assuming the price of gold is $1500 per troy ounce, then one ton of pyrite would be worth a little over $100,000.
In fact, pyrite is heavier than gold. I'm not sure exactly, but I believe it is anywhere from 5% to 20% heavier than gold of the same volume.
Pyrite also known as "fool's gold" is a mineral that has both a different chemical, morphological and physical characteristics than gold. Gold is denser (i.e. the same size of gold is much heavier than the that of pyrite). Gold's average density is 17.64 g/cm3 while Pyrite's density is on average 5.01 g/cm3. The chemical formulas are different. Gold's chemical formula is "Au" while Pyrite's is and iron sulfate mineral with a formula of "FeS2". The color is also different, gold appears the color of gold while pyrite is more bronze in color. The crystallographic form of the minerals also vary. Gold is a very soft mineral while Pyrite is much harder (gold has a hardness of 2.5 while Pyrite is 6.5). To distinguish between a sample of each, you could scratch the surface of gold using your fingernail which you would not be able to do with pyrite. You can try to scratch it because pyrite or fools gold much harder then gold so if it doesn't scratch that much it is most likely pyrite or fools gold. You can tell them apart by looking at their reflection and streak. Also, gold is much more dense than pyrite, so the same volume would 'weigh' about 3.5 times more. Gold has a hardness of about 2.5, while pyrite is about 6 (Gold is softer and more malable). Streak is used to distinguish between Gold and Pyrite.
The density, or mass of an object divided by volume, differs for all objects. Fools gold, or otherwise known as pyrite, looks like gold, but the density is 4.8-5 grams/cm^3. Real gole is 19.32
The density, or mass of an object divided by volume, differs for all objects. Fools gold, or otherwise known as pyrite, looks like gold, but the density is 4.8-5 grams/cm^3. Real gole is 19.32
It depends. Pyrite (or "fool's gold) is a mineral that can contain 0.25 percent or more of gold. If a pyrite sample contains this amount, and assuming the price of gold is $1500 per troy ounce, then one ton of pyrite would be worth a little over $100,000.
No. ----------- Well, maybe and maybe not. Not ALL pyrite is magnetic, but some is. That said, Iron Pyrite, or fool's gold, can be tested for by a malleability test. Using a pin, or a pocket knife, try to cut or 'stab' the sample in question. If it bends to the point or blade, it is most-likely gold. If it shatters or breaks, it is most-likely either Iron Pyrite or Mica. In 20-years of hobby-prospecting, the pocket-knife test is the best. That, and visually inspecting in direct sunlight where possible. Gold will have luster in and out of direct sunlight. Iron Pyrite will not display luster out of direct sunlight. Final test for Iron Pyrite is Specific Gravity. Gold is 19.3, while Iron Pyrite is 5 (+/-0.1). With a pan, you can easily differentiate Iron Pyrite from Gold by stratification in a soil sample.
If you mean pyrite or gold- gold is soft- pyrite is brittle. Gold melts easily- pyrite does not. Acid dissolves pyrite, but not gold. Finally- you may have heard "All that glitters is not gold". It SHOULD be "NOTHING that glitters is gold." Natural gold may be shiny, but does not glitter- like pyrites will.
Iron Pyrite - which is a sulphide mineral - FeS2.
Pyrite