you can't
Hey Dummy, Didn't you know that after 2006, BMW did not include a spare tire, jack, and lug wrench since the cars had run-flat tires as original equipment. You just need to get a spare tire and jack since you can use your head as the wrench (lug nut head).
You need a jack and a wheel brace (wrench)
This enables a flat tire change with a spare tire en route.
If you don't have a jack or wheel wrench there is no way to remove the tire. Unless you can turn the holder with a pliers, wrench or socket.
To change a tire on a 2000 Porsche Boxster, first, ensure the car is on a flat surface and engage the parking brake. Locate the spare tire, jack, and lug wrench in the front trunk. Loosen the lug nuts slightly before lifting the car with the jack, then remove the lug nuts completely and take off the flat tire. Install the spare tire, hand-tighten the lug nuts, lower the car, and then fully tighten the lug nuts in a crisscross pattern for even pressure.
To change a flat tire on a 2004 Jeep Liberty, you would typically use a scissor jack, which is the standard jack provided with the vehicle. This type of jack is designed to lift the vehicle by using a cranking mechanism. It's important to ensure the vehicle is on a stable, flat surface and to follow safety precautions when using the jack. Additionally, the Jeep may also have a full-size spare or a temporary spare, depending on the model and options.
Immediately pull off the road and stop. Set the parking brake on your car. Use the jack to jack up the car and change the flat tire to the spare. If you are unable to accomplish this call for help.
The owners manual will have directions as to where the jack, tire and wrench are stored in the vehicle along with the correct place to put the jack so as not to damage the vehicle.
Where is the spare tire located on a 1987 Corvette? Under the back of the car below the CORVETTE, use the lug wrench to lower it the jack is on top of the tire.
First loosen the lug nuts just a touch, then get or find the spare tire. Now jack up the vehicle, remove the the flat tire and fit the other . Tighten all the lug nuts as much as you can alternately. Now lower the car gently and when the new tire is touching the ground firmly, re-tighten all the lug nuts again. now lower the vehicle totally and pack the jack and flat away.
Should be inside the spare tire on shelf in trunk
How to change your own tires on a stratus. First your car needs to be parked on a flat surface to prevent rolling. Get out your vehicle tool kit. Remove your spare tire, then loosen your flat tires lug nuts, but do not completely remove. Set up your jack so your automobile does not lean. Completely remove the lug nuts. Remove the flat tire. Slip on the spare and tighten in the lug nuts. Remove jack.