Check the fuse
I mean how do you disassemble the fan blower in a 1998 Jeep Grand Cherokee Laredo. how do you remove the blower fan from the car in the Grand Jeep Cherokee Laredo.
No,
Why Is the fan is not running fast enough to cool down the motor? On A Jeep grand Cherokee Laredo 202
Please, rephrase the question. You say you have a 1989 Jeep Grand Cherokee, but the Grand Cherokee did not come out till late 92, but was considered a 93 model. If what you really have is a 1989 Cherokee, we need to know the motor size. The rest we can look up and give you the best answer possible.
Weak battery or alternator output.
2
the blend door motor.
it is quite simple fi you replaced the motor or switch on that door and you replaced the front passenger switch then the is a broken wire in the grommet before the pillar hope this helps
I mean how do you disassemble the fan blower in a 1998 Jeep Grand Cherokee Laredo. how do you remove the blower fan from the car in the Grand Jeep Cherokee Laredo.
what size motor?
driver side on the back of the motor where is crak sensor on 94 jeep 4.0 grand Cherokee
SixSix
Yes and no. As long as the motor is the same, the harness should be the same.
Not sure how to help, other than you will have to use bolts that fit.
It is bolted under dash on passenger side.
10w30
Check the resistor pack on or near the fan , it may have melted and needs to be replaced.