0
If you want to build the smallest system you can should you choose a Micro-ATX or Mini-ITX motherboard?
Wiki User
∙ 6y ago
Mini-ITX. It is much smaller than ATX variants.
Wiki User
∙ 6y ago
Add your answer:
Earn +20 pts
Why install master and slave hard drive in motherboard?
Master and Slave configuration is necessary for motherboard in order to choose right disk to boot from.
What motherboard should you choose with this processor?
Depends on what processor you're using. Go to the manufacturer's site and find the product, it should tell you the socket that the processor requires. Any motherboard with that socket will be compatible
Which two motherboard features must be compatible when selecting a new CPU Choose two?
chipset and socket type
Which foods should you choose in the smallest amounts or not at all?
You should choose foods which are high in fat and sugar in small amounts or not at all.
When a computer is being built which three components must have the same form factor (Choose three.)?
The case, motherboard, and power supply must all be the same form factor. Obviously the motherboard and the case would have to be the same or the motherboard would never fit in the case. Then the power supply must not only fit in the case, but have the same connectors as the motherboard. Otherwise it won't work.
Choose the definition that fits this term.range?
the difference between the largest and smallest numbers in data
How to Choose the Right Computer Tower?
Once people realize how much money they can save by building one’s own computer, many jump in feet first. They soon realize that there are many aspects of the process that they never considered. One such aspect is the computer case or tower. With the diverse selection available, how does one choose the right tower for them?Our goal is to balance price, functionality and aesthetics. Yes, you read that correctly, aesthetics. Our computers have become focal points of our homes. Therefore, it is all right to accentuate aesthetics as much as any other quality. Fortunately, case manufacturers understand this requirement. There is no shortage of good-looking cases at a wide range of price points with all manner of functionality.For the next step, you will need some information handy, such as the format of your motherboard. If you will be building a dedicated video card into the new computer then you need to be aware of its length and width. Modern video cards have gotten rather large. As have third party CPU heat sinks. Some of the heat sinks used today are very tall, which means a width requirement for your case. Be aware of it if that is applicable.Have this information handy when you’re shopping. The two most common motherboard sizes are ATX and MicroATX. If you are using a MicroATX motherboard then it will fit without issue in most cases. However, there are cases designed for MiniATX motherboards that will be too small. If you are using an ATX motherboard then you must be more careful because there will be many mid-tower cases that will be too small for your needs.The three basic styles of tower case are mini-, mid- and full-tower. Generally, the mini-tower is suited for the MiniATX, the mid-tower is suited for the MicroATX, and the full-tower is suited for the ATX. However, many mid-towers are actually sized in-between MicroATX and ATX. They fit ATX perfectly fine without all of the extra size requirements.Once a tower catches your eye:•Verify that they designed it with your motherboard format in mind.•Verify that it is deep enough to hold your video card with plenty of clearance for your hard drives.•Verify that it is wide enough to hold your heat sink with the panel closed.•Ensure that the case has ample airflow, at least one intake fan and one exhaust.•Pay attention the noise level of the case, which can be masked in-store.
What is a good ATX motherboard supporting P4 processor specifically for a graphics workstation?
You can choose motherboards based on following chipsets: Intel
How do you choose a motherbord?
1) According to type of latest processor 2) motherboard with latest popular manufacture and latest features 3)
I just got a new motherboard with same sockets but my speakers aren't working. Motherboard model is P4SD. Everything else works fine. Do i need new drivers and if so where can i get them?
If your sound does not work, most likely you need drivers. First of all make sure that you know your motherboard model. After that go to the motherboard manufacture website, for instance, you have Asus. Go to asus.com choose your country. Go to support, locate drivers and so on.
How do you know which CPU RAM and motherboard are compatible?
First of all I would choose a motherboard, as you choose RAM and a CPU that will go with your mother board. So if your motherboard is a AM2+ Socket, any AMD AM2+ socket CPU will fit into it and if it has DDR2 RAM Slots, then you are required to get DDR2 RAM
Add 100 to the smallest number with no digit number repeated?
The smallest number with no digits repeated would either be zero or one, depending on the set of numbers you want to choose from.
