yes Electrode Positive is the same as Reverse Polarity
smaw welding is sheilded metal arc welding
Using DCSP when welding thin material causes more heat to be concentrated in the electrode than in the base metal. This prevents the arc from burning thru thin materials before the electrode melts.
arc welding such as SMAW (stick), GMAW (mig). Some cast metals may be brazed for certain applications. The actual properties of the Cast metal will be needed for the type of electrode and/or process.
DC-
to make sure the moisture is out of the rod.
Direct current electrode positive
smaw welding is sheilded metal arc welding
The minimum thickness for SMAW welding is about 18 ga. with a steady hand.
SMAW stands for Shielded Metal Arc Welding. This process uses electrodes with flux coating, which release gases to surround the weld metal, thereby preventing oxidation.
Using DCSP when welding thin material causes more heat to be concentrated in the electrode than in the base metal. This prevents the arc from burning thru thin materials before the electrode melts.
Advantage of smaw :*equipment is relatively inexpensive Equipment is portable because the welding machine can be powered with gasoline or diesel powered w/ engines.
SMAW stands for shielded metal arc welding. The rectifier used in the welding machines must be referring to this type welding.
A welding chipping hammer is a hand held tool, like yourself. It is used for removing slag after the SMAW or flux core process.
no need
5000
Cast iron welding rod is designed for the SMAW process which is built by flux and a filler metal that suits the base metal's chemical & mechanical properties.
Shielded Metal Arc Welding, known colloquially as "stick".