The "twist" in a twisted pair helps to prevent induced voltage. if the wires are straight and parallel the wires will get charged with voltage much like a transformer gets charged by the forces running parallel to it on the other side of the core. As far as its affect on radio transmissions. Radio frecuencies are resonant at different lengths. For example 144Mhz is resonant at 2meters or at fractions of the same. 28mhz is resonant at 11meters A quarter wave at 2meters is 19.1 inches. a quarter wave at 11meters is 8.5 feet. By having a twist in the wire you would be nullifying the possibility of induction because the plus and minus poles would be crossing each other at a rate much closer than the resonant lenght of the nearby transmitter. Interference used to be much greater in the old days when the telephone company used two pair straight wiring( red,green,yellow, black) to wire houses. I hope this helped to answer your question. Ex. Telephone Company Installer Current Amatuer Radio Operator
(1) the higher the twist, the higher the throughput (2) The higher the twist, the the lower the crosstalk
Twist of Fate in WWE and Twist of Hate in TNA. Actually it is the same move and when hardy moved to TNA, they were not allowed to call it Twist of Fate because the move's name was copyright to the WWE. So, they just changed it to Twist of Hate
Contact Remington on their web site. Your question is impossible to answer without the caliber of the rifle
Twisting your ankle affects the musculoskeletal system.
There is a piece to twist. Twist until it is about as open as a pinkie. you can look up how to hold the bow. also how you slide the hairs against the strings will affect the volume you get
Three forces are Pull ,push and twist . This tell me that the three forces are pull and push and twist anda scanciey answere shdcuedhcuehcuehucheucijreivjerivjrijvirjvirjv.
Friedrich Keune has written: 'Low aspect ratio wings with small thickness at zero lift in subsonic and supersonic flow' 'The influence of camber and geometrical twist on low-aspect-ratio wings of finite thickness in subsonic, transonic and supersonic flow'
Oliver Twist.
In order to measure the length it takes for a bullet to spin a full rotation, you can use a cleaning jag. Make a mark on the end of the rod and insert it. When the mark has rotated a full 360°, mark the rod flush with the barrel and measure the distance between the two marks. That is your twist rate ratio. So if it takes 10 inches to turn 360°, then your twist rate is 1:10. There are also special tools that attach to cleaning rods for measuring a rifles twist rate.
S and Z twist are two types of twist given to yarn. Before giving twist fibre /roving strand has to be parallel so that either twist given is not affected. Either of twist is suitable but in practical applications Z twist is given to yarns either be knitting or weaving.
Do not twist my words.He tried to twist the bottle open.He managed to twist his ankle.
Oliver Twist