0
the hot wire carries the electrical voltage
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
When removing an electrical plug from its socket grasp the electrical cord?
Do not remove any electrical plug by grabbing the wire. This weakens the connection at the plug. ALWAYS grab the plug itself when removing it.
What causes a male electrical plug to weld it self to the female electrical plug plug in?
A current higher than what the plug is rated for will cause that type of condition.
What colour code for 3 pin plug in NZ?
The live wire is brown in coulor while the earth wireis green and yellow in color and neutral wire is blue in colour. Uses of these three wire: Live wire:It's connected with fuse.It carries a voltage which drives electric current through the electrical appliances. Earth wire:It is a safety device and protect us from electric shock. Neutral wire:It offers a return path by electric current.
What check should be done to an electrical measuring device before attempting to measure electrical resistance?
An electronic measuring device also known as a multimeter is used to check the electrical voltage in homes and industrial areas. The checks that need to be done before a multimeter is used is the to plug the black test lead into the black socket marked com. The red lead plugs into the red socket marked voltage and resistance.
Will a 12 volt light plug into a standard wall outlet?
No, it will cause the bulb to blow. A 12 volt light is DC voltage and your home outlet is AC voltage.
What amount of voltage surge do you need to plug two deep freezers and a refrigerator?
Voltage surges are undesirable in electrical systems. The question does not make sense and/or has insufficient information to be answered.
An appliance plug can be distinguished from other plugs by its?
permanent attachment to an appliance An appliance plug may have a differently shaped plug, in order to prevent it from being plugged into an ordinary electrical outlet (one with the wrong voltage or power rating).
Travel iron that says 110volts 250watts is that ok to use in the USA afraid to plug it in it has a us plug?
110 volts is the standard electrical voltage in the USA, so you will not damage your iron, when you plug it in. If the iron is dual voltage (110/230 volts), move the voltage selector switch to 110 volts before you use it in the USA. However, there are two diffferent types of electrical socket in North America (with or without earth grounding). For safety reasons, I would not recommend using your iron (anywhere in the world), unless the plug has a round earth pin, in addition to the two flat bladed pins.
When removing an electrical plug from its socket grasp the electrical cord?
Do not remove any electrical plug by grabbing the wire. This weakens the connection at the plug. ALWAYS grab the plug itself when removing it.
Is an electrical plug an insulator?
An electrical plug contains both conducting and insulating elements.
How does a fuse power a electrical plug?
A fuse doesn't 'power' an electrical plug. A fuse protects the load supplied by that plug.
Can you plug a 120 volt pressure washer into a 110 outlet?
Yes you can. Most electrical appliances will work if supplied with power that's within 10% of their voltage rating.
What causes a male electrical plug to weld it self to the female electrical plug plug in?
A current higher than what the plug is rated for will cause that type of condition.
Is New Zealand voltage the same as the United Kingdoms?
New Zealand uses a voltage of 230 V, the UK uses a voltage of 230 V, so yes, they're the same. They also have the same electrical frequency of 50 Hz. On the other hand, New Zealand uses plug type I while the UK uses plug type G (source: voltageplugregion.com ).
Can you insert the plug which says ac 100-127 on a 220 outlet?
No, the rating on electrical devices is the maximum amount of voltage that is legally allowed on the device. This is usually established by the physical clearances between electrical potentials. The higher the voltage, the more space between live electrical components. This is controlled by using different pin configurations of plugs and receptacles for different voltages and amperages.
What is Voltage in Australia?
The standard household electrical supply is 240 Volts AC at 50 Hertz nationally. Note that Australia's used the "I" plug (socket), so if you're coming from almost anywhere else (except for a few countries, including parts of China), then socket compatibility is an issue. The best thing to do is to buy a universal plug adapter.
What does the live wire do in an electrical circuit?
The live wire in the supply cable carries current from the power station to the electrical device that you want to use. The current returns to the power station through the neutral wire in the supply cable. For safety reasons, on some electrical equipment there is also a ground wire - also known as an earth wire. It is connected to any metal parts on the outside of the unit, such as a metal case, and to any internal metal chassis, motor framework, etc. The ground wire is necessary to conduct away the current which could otherwise kill someone if a fault or an accident happens which damages the insulation of the live wire so that it touches any of those metal parts and gives them a high voltage. That would be very dangerous to the human users of the equipment.
