There are little gears right behind the headlight assemblies.
Open the 2001 Subaru engine compartment hood. Remove the wiring harness from the back of the headlight. Remove the headlight assembly bolts. The headlight will come out. Reverse the process to install the new headlight.
The cost of a new transmission for a 2001 Saturn will depend on the store or transmission shop. On average, a new transmission will cost an estimated 670 dollars.
Open the hood to your 2001 Dodge Ram 1500 engine compartment. Take hold of the headlight connector. Push the connector in and turn at the same time. Do the same with the headlight bulb. Reverse the process to install the new lightbulb.
By taking the old one out and installing a new one...
1. Remove the driver's side headlight. 2. Unbolt the horn and bracket from car. 3. Get replacement 3-wire horn. (available from Saturn for ~$70) 4. Install new horn and bracket on car. 5. Intall headlight.
Yes, disconnect the negative cable.
You cannot change the bulb you have to change the whole headlight. Which is actually cheaper than you think. It cost me 11.97 for 1 headlight. Saturn calls it a Sealed Beam 2e1 headlight. So to change this all you need is a torx head screwdriver to remove the old headlight and install the new one. The only dissapointment is there is no way to change the bulb, i wanted to make it a blue tinted color but of you try to break the seal... the headlight will not function properly.
Either the cap is cracked, which you will need a new one from the dealer. Or you forgot the o ring when installing the new filter
go to the scrap yard and get a new one.
Remove the two headlight mounting bolts and slide the entire headlight assembly forward. You can then disconnect the Bulb from the sockect and remove the bulb from the headlight housing. Installing is just as easy. Install the new bulb, connect the blulbs electrical connection and re-install the headlight. Should take about 5 minutes all togather.
The headlight socket is made into the headlight assembly. You have to change the whole headlight. If you dont have mech experince then i would let a shop do it because its easy to change but the new one has to be aligned using the adjustment screws. This can be a pain if you dont know what your doing. The headlight socket is made into the headlight assembly. You have to change the whole headlight. If you dont have mech experince then i would let a shop do it because its easy to change but the new one has to be aligned using the adjustment screws. This can be a pain if you dont know what your doing.