Depends on what you mean.
If you want a nice puttering sound as you ride along, you'll fold part of the card double around a fender strut so that the free end protrudes int the spokes. Clamp it in place with a clothes pin.
For extra points, tie a string between the end of the clothes pin and the handle bar, so that the tension on the string controls the angle of the card against the spokes.
If you haven't got fender struts, try attaching the card by the seatstays.
If you don't want the sound, but is instead going for that Messenger/Hipster style of blinging their bikes by displying cards in their wheels, then it's even simpler. Just interlace a card by running it over one spoke, under the next, then over again, and slide it towards the hub until it sticks.
The short answer:
- No, not in your lifetime.
The long answer:
- It's possible, but you'd have to work real hard at it.
Spokes are usually stainless steel, a fairly tough and durable material. The cards are basically paper.
Spokes are so much harder that you'd have to go through a huge stack of cards before you'd see any damage to the spokes.
There are a number of ways in which you could make your bike click. You could add a card to the spokes for example.
A wheel with 10 spokes will have 10 spaces between the spokes.
You don't. You fold part of the card double around one of the struts to the fender and secure with a clothes peg, with the other end of the card protruding into the spokes. You can also run a string from the outside end of the clothes peg and up th the handle bar. That allows the rider to manipulate the angle of the card against the spokes and create different sounds
hold tire in place
That would differ from one bike to another. A really small bike with maybe 12" wheels will have fewer spokes than a bike with 20" wheels. Say between 24 and 36.
adjust the bike and us tools to structure it
Yes there are they are of a stronger metal than a push bike.
Well, water colors, no; any can of paint, sure. Clean and scuff spokes for max adherence.
Folks On Spokes. It's a bike trail.
the bike wheel has three spokes and the idea came from air foils on a space shuttle
you cant tighten spokes on an ATV, they have solid aluminum or steel rims. but you can tighten spokes on a dirt bike by getting a spoke wrench and tightening the nipple at the end of the spoke closest to the rim.
The tire is only the rubbery part on the outside, and it hasn't got any spokes. The wheel (which also includes hub and rim) has spokes, usually 36 of them but other numbers are possible.