We use the "MOTOR GENERATOR SET" to convert the DC power to AC power we use DC motor and ac generator in it. It is very efficient way to convert the DC power to AC power.
hot wire ammmeter or a moving iron ammeter will work for ac and dc. can you still obtain either... don't know
A typical multimeter can measure voltage, current (both AC and DC), and resistance.
voltmeter or oscilloscope.
If this is a homework related question, you really should consider trying to solve it yourself before looking at this answer. Otherwise, the value of the lesson, and the reinforcement provided by the assignment, will be lost to you.A moving coil measuring instrument has a coil attached to the indicator, surrounded by a magnet.A moving iron measuring instrument has a magnet attached to the indicator, surrounded by a coil.In both cases, the indicator is driven by magnetic torque caused by current flow in the coil.
RSA
Instrument Transformer
A meter can be used both on the positive or negative side of a circuit when measuring current. The current going to a load should be equal to the current coming back from the load. When measuring DC current, make sure the meter should be more than adequete to be placed in series with the circuit. Otherwise, use a clamp-on meter.
No, there is no suitable adhesive. These must both have threaded endings and be mechanically attached or use something like a 'Sharkbite'
It's not possible to measure both of those quantities with a single instrument. Wind speed . . . anemometer Air pressure . . . barometer
No single instrument can measure both of those quantities.
Anemometer-An anemometer is a device for measuring wind speed, and is one instrument used in a weather station. The term is derived from the Greek word, anemos, meaning wind.Anemometers can be divided into two classes: those that measure the velocity of the wind, and those that measure the pressure of the wind, but as there is a close connection between the pressure and the velocity and a suitable anemometer of either class will give information about both these quantities.
Scalar quantities - quantities that only include magnitude Vector quantities - quantities with both magnitude and direction
The same method is used for both surface and submerged currents: you place a measuring instrument in the current to be measured, and you observe and note its progressions.
IT DEPENDS WHAT MEASURING INSTRUMENT YOU ARE USING. RMS - IF USING THE CLAMP AMMETER OR PANEL METER OSCILLOSCOPE - BOTH CAN BE READ
Scalar quantities are physical quantities that can be described with a single value. They are unlike vector quantities which require both magnitude and direction.
the quantities which have both magnitude and direction are called vector quantities
Equal quantities.
sphymomanometer is an instrument used for measuring thew bloodpressure. It is based on the the principle of pressure exerted by the column of blood on the unit area of the blood vessel . Both the systolic and diastolic pressure can be measured by this instrument.
Piano.
Vector quantities are those that must be described with both a magnitude and direction. Scalar quantities can be described with only a single value.