0
Interior lights stay lit when ignition switch in on position replaced courtesy lamp relay-no luck 95 mystique?
Wiki User
∙ 10y ago
There should be a switch that has three positions, one position to have the courtesy lights come on only when doors are opened, another position to turn courtesy lights off completely and another position to have courtesy lights stay on continually.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
Where is the camshaft position sensor located on a 96 Mercury Mystique - Ford Contour?
Where is the camshaft position sensor located on a 98 Mercury Mystique 2.4??
When was Position Ignition created?
Position Ignition was created in 2009.
Where is the camshaft position sensor located on a mercury mystique?
The camshaft position sensor for a Mercury Mystique is located on top of the motor. It is bolted in the same place where older versions of the engine had a distributor.
Where is the exact position to mount the courtesy lights on a 1959 corvette?
== ==
How do you change ignition switch on 1987 ford f150?
The ignition switch is usually mounted to the steering column and is operated by a linkage rod. NOTE On column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible. On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.The ignition switch is operated by the key switch. Courtesy of Ford Motor Company. To replace the switch: * Remove the ignition switch wiring harness. * Unbolt it from its position. * Bolt the new switch into position. * Attach the witing harness.
How do you change an ignition switch on a 1986 ford F150?
The ignition switch is usually mounted to the steering column and is operated by a linkage rod. NOTEOn column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible. On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.The ignition switch is operated by the key switch. Courtesy of Ford Motor Company. To replace the switch: * Remove the ignition switch wiring harness. * Unbolt it from its position. * Bolt the new switch into position. * Attach the witing harness.
How do you change the ignition switch on a 97 Ford F 150?
The ignition switch is usually mounted to the steering column and is operated by a linkage rod. NOTE On column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible. On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.The ignition switch is operated by the key switch. Courtesy of Ford Motor Company. To replace the switch: * Remove the ignition switch wiring harness. * Unbolt it from its position. * Bolt the new switch into position. * Attach the witing harness.
How do you replace the ignition switch on a 1991 Ford F-150 pickup?
The ignition switch is usually mounted to the steering column and is operated by a linkage rod. NOTEOn column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible. On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.The ignition switch is operated by the key switch. Courtesy of Ford Motor Company. To replace the switch: * Remove the ignition switch wiring harness. * Unbolt it from its position. * Bolt the new switch into position. * Attach the witing harness.
Do you have to turn on the switch to reset the tire pressure light?
Yes, the ignition switch must be in the ignition position -not- the accessory position.
What is The Wiring position for the ignition module on a 1990 Buick park avenue?
what is the wiring position for the ignition module on a 1990 Buick Park Avenue?
Why interior light stays on?
The switch is in the on position.
Is there a camshaft position sensor on a 2.2 ecotec engine?
The 2.2L Ecotech engine does not have a Camshaft Position Sensor. It has a unique type of ignition system which consist of Ignition Module, Ignition Coil Assembly, and a Crank Sensor.
