220 to 240 voltage range
Yes, 220 and 240 volts are a nominal figure in the same voltage range. It is brought about by the power company, as they have a responsibility to keep voltages within a certain 10% range. The load will only notice a difference of 1% on the load current. e.g. Wattage load of 2400. Amps = watts/volts. 2400/240V = 10 amps. 2400/220V = 10.9 amps. On a constant resistance as the voltage goes lower, the current goes higher and vice versa as the voltage goes higher, the current goes lower.
110v
No, the unit has to operate on the voltage specified. The internal controls are all designed to operate on a 240 volt input. The motor in the air conditioner will not operate at the lower voltage and without this compressor motor operating the unit will not get cold.
Answer for USA, Canada and countries running a 60 Hertz supply service.The use of two breakers supplies a voltage of 240 volts. These two breakers should be common ties together with a single handle. Your air conditioner must operate on 240 volts. To verify this check the nameplate on the unit for the voltage.
A motor will operate on 400 volts.
At 120 volts you can operate any equipment up to 1200 watts. At 240 volts you can operate any equipment up to 2400 watts.
110v
No, the unit has to operate on the voltage specified. The internal controls are all designed to operate on a 240 volt input. The motor in the air conditioner will not operate at the lower voltage and without this compressor motor operating the unit will not get cold.
There is no difference in horsepower. The manufacturer builds the air conditioner. Engineers calculate and tell the manufacturer how much power is going to be required to make it operate. Smaller units will probably use lower voltage with lower horsepower to operate efficiently. The bigger the unit will take higher horsepower to operate. There comes a point when single phase, low voltage use will not work due to the unavailability of high horsepower, low voltage motors. At this point three phase systems are used with higher voltages to operate the motors. Examples of a 10 HP motor at different voltages. Single phase - 115 volts 100 amps, 230 volts 50 amps. Three phase same HP - 200 volts 32.2, 230 volts 28, 460 volts 14 and 575 volts 11 amps. As you can see if the air conditioner needs a 10 HP motor at single phase 115 volts, a feeder supply of 100 amps would be needed. This compared to the same air conditioner using a three phase 575 volt system which draws 11 amps.
Answer for USA, Canada and countries running a 60 Hertz supply service.The use of two breakers supplies a voltage of 240 volts. These two breakers should be common ties together with a single handle. Your air conditioner must operate on 240 volts. To verify this check the nameplate on the unit for the voltage.
120 volts
A motor will operate on 400 volts.
In the US all microwaves operate on 110 volts.
...volts.
It blows air at how many volts it was designed for... an automotive unit will be 12 volts, heavy equipment uses 24 volts, a window unit in N. America will run 110 volts, while 220 and 440 volt systems are typically heavier household and industrial units.
All standard factory installed electrical devices operate on 12 volts.
Does this air conditioner require 220 volts?
The 8085 and 8086/8088 operate on 5 volts.