0
What else can I help you with?
What is the Max amps for 6 gauge?
50 amps
How much current will flow through a 12 ohm register if 6 volts are applied across it?
Using Ohm's Law (V = I * R), we can calculate the current (I = V / R). Plugging in the values, we get I = 6V / 12Ω = 0.5 Amps. So, 0.5 Amps of current will flow through the 12 ohm resistor.
How many amps for a 0.75mm cable?
5 amps
Using 120 volts at 12 amps is the same power as what amps at 220 volts?
6 amps.
6 watts is how many amps 24vdc?
For a resistive load Watts = Volta * Amps. Therefore, you have 1/4 amp or 250 Milliamps (250ma)
How many watts in 6V?
None by itself. Watts are measurement of power, and power is volts times amperes. Secondly, the 6 volts must be in an electrical circuit (loop) to create current flow (Amps). Thirdly, the resistance of whatever the 6 volts is powering determines current flow (Amps). So, without knowing the current flow, you cannot calculate power. Fourth, power (Watts, horsepower, ergs, chevals vapeur, etc) is a measurement taken over a certain time - it is not instantly measureable with an inexpensive meter like a voltmeter or an ammeter (Amp-meter).
How much is 6 amps in a reciprocating saw?
6 Amps is about the right rating for a medium size reciprocating saw.
If you have 72 watts and 12 volts dc how many amps am i producing?
To find the amperage, you can use the formula: Amps = Watts / Volts. In this case, with 72 Watts and 12 Volts, you would have 6 amps of current.
How many electrons are there in carbon?
if its not an ion it has 6
If two electrical loads are connected in parallel with each other and each load draws 6 amps what is the total current of the circuit?
The total current in the circuit would be 12 amps. When electrical loads are connected in parallel, the currents add up. So if each load draws 6 amps, the total current would be the sum of both loads, which is 6 + 6 = 12 amps.
How many amps does line 6 have?
Line 6 specialize in modeling amplifiers, software that is used for recording and digital modelling for guitars. There are 6 guitar amps made by Line 6.
How many amps in 6 kw?
UK Mains is 230V therefore 6 KW is 6000/230 = 26 Amps. 3 phase is slightly different....... 6000/400V = 15 Amps/root 3 = 8.67 Amps per phase.
