An ohmic resistor is a resistor that obeys Ohm's law, and a non-ohmic one dose not. All resistors resistance will begin to change as there temperature changes, and often we need a resistor with a steady resistance, thus some resistors, which we refer to as ohmic, will disperse the heat being generated and therefore it will keep a steady resistance. Resistors that do not disperse their heat will have varying resistances and therefore are non ohmic. Ohms law, named after the German physicist Georg Ohm, states that the current through a conductor, between two points, is directly proportional to the potential difference (voltage) across the two points, and inversely proportional to the resistance between them. ~Ben Frilay-Cox
It depends on whether the material is ohmic or non-ohmic.If it is ohmic, then it will obey Ohm's Law, and its resistance will remain constant if the current decreases.If, on the other hand, it is non-ohmic, it will not obey Ohm's Law and, if the temperature of the conductor falls (assuming it is a metallic conductor) due to the fall in current, then its resistance will fall too.
Ohm's law states that the current and potential difference (voltage) are directly proportional, provided the temperature is constant. The resistance of a thermistor is dependant on the temperature, so it does not obey Ohm's law. Components that do not obey Ohm's law are non-ohmic conductors.
An 'ohmic' resistor is one which obeys Ohm's Law. For Ohm's Law to apply, the resistance of a circuit must be constant over the range of incremental voltages applied to it. If the resistance changes over an incremental range of voltages, then it is said to be 'non-ohmic', and it does not obey Ohm's Law.
158980
ohmic conductor does obey ohm 's law. non ohmic conductor does not obey ohm's law.
non ohmic devices are diodes, LED's, Thermistors, LDR(light dependent resistors, cells in series.
ohmic conductors are those which obey ohm's law
Diode is a non-ohmic conductor since in diodes current-voltage relation ship does't obey Ohm's law....the relationship between current and voltage is nonlinear here,...
If it has constant temperature (one can do this by dipping it in a beaker of water) it can be considered an ohmic conductor since Ohm's law states that the Voltage and amperage are directly proportional in a metallic conductor of constant temperature.
When LDR is exposed to light energy . Due to light energy incident on LDR surface, free electron movement of an atom is increased in LDR. This causes high conduction of curent flowing through LDR. beause of free electron movement in LDR, resitance get decreased.
ohmic ocnductor is a material which obeys ohm's law: i.e. the voltage and current are directly proportional 2 each other anda non-ohmic ocnductor is a material which doesn't obey ohm's law:)
A 'non-ohmic' conductor is one that does not obey Ohm's Law -i.e. the ratio of voltage to current is not constant when the voltage across it varies.
That depends on the what substance the wire is made from. Wires made from metals, such as iron, copper, gold, are good conductors. Wires made from aluminum would not be as good of a conductor.
An ohmic resistor is a resistor that obeys Ohm's law, and a non-ohmic one dose not. All resistors resistance will begin to change as there temperature changes, and often we need a resistor with a steady resistance, thus some resistors, which we refer to as ohmic, will disperse the heat being generated and therefore it will keep a steady resistance. Resistors that do not disperse their heat will have varying resistances and therefore are non ohmic. Ohms law, named after the German physicist Georg Ohm, states that the current through a conductor, between two points, is directly proportional to the potential difference (voltage) across the two points, and inversely proportional to the resistance between them. ~Ben Frilay-Cox
It depends on whether the material is ohmic or non-ohmic.If it is ohmic, then it will obey Ohm's Law, and its resistance will remain constant if the current decreases.If, on the other hand, it is non-ohmic, it will not obey Ohm's Law and, if the temperature of the conductor falls (assuming it is a metallic conductor) due to the fall in current, then its resistance will fall too.
no.....thermistors are not ohmic.