Chemical resistance charts seem to list Polyacetal/Delrin's compatibility with acetone as either 'A' (no effect) or 'B' (minor effect). Methyl acetone has a rating of 'D' (severe effect).
Yes, polyacetal is generally compatible with acetone. Acetone can be used to clean and remove contaminants from polyacetal surfaces without causing damage. However, prolonged exposure to acetone may cause some weakening or swelling of the polyacetal material.
Periodic acid is usually compatible with acetone. However, the compatibility may vary depending on the specific experiment or application. It is recommended to check the chemical compatibility of periodic acid with acetone in the specific context you are working in.
Acetone can ruin plastic cuvettes because it can cause the plastic material to dissolve or degrade. The chemical structure of acetone can interact with the plastic, leading to changes in its physical properties and potentially causing it to become cloudy, brittle, or deformed. It is important to use compatible materials when handling chemicals to avoid damage.
No, because when you add acetone to acetone, all you are doing is adding more of the volume of acetone to acetone. You are just changing the amount of acetone, not anything chemically happening.
Its a polyatomic ion called Acetate
Acetone exists as a liquid at room temperature but can evaporate to form acetone vapor, which is a gas made up of acetone molecules.
Periodic acid is usually compatible with acetone. However, the compatibility may vary depending on the specific experiment or application. It is recommended to check the chemical compatibility of periodic acid with acetone in the specific context you are working in.
Acetone can ruin plastic cuvettes because it can cause the plastic material to dissolve or degrade. The chemical structure of acetone can interact with the plastic, leading to changes in its physical properties and potentially causing it to become cloudy, brittle, or deformed. It is important to use compatible materials when handling chemicals to avoid damage.
No, because when you add acetone to acetone, all you are doing is adding more of the volume of acetone to acetone. You are just changing the amount of acetone, not anything chemically happening.
Yes, mainly there are 3 types of acetone: regular acetone, acetone with enriched formula, maximum strength acetone.
Its a polyatomic ion called Acetate
Acetone exists as a liquid at room temperature but can evaporate to form acetone vapor, which is a gas made up of acetone molecules.
Acetone will not make Styrofoam hard. Putting Styrofoam in acetone will dissolve how to do it is easy. Place a bit of acetone into a bowl then put in the Styrofoam in the bowl and it will dissolve away.
Acetone burns in oxygen.
Its ethanol.. NOT acetone!!
Yes. Acetone is a degreaser
Acetone in the gaseous form (when liquid acetone evaporates).
Use acetone. If you don't have acetone, use nail polish remover. It has acetone in it.