both are rear wheel drive so technically im sure it can be done. with extensive fabrication and electrical work just do an sr20 or ca18 swap its much easyer
no you have to change the bell housing with a sr20 will bolt straight up
CA18DE(T) RWD & SR20DE(T) RWD clutches have different bolt patterns on the pressure plate. The CA18DE & KA24DE clutches are VERY similiar. You can use the KA24DE pressure plate on the CA18DE(T) flywheel, but you must remove one of the dowel pins. The fit is extremely tight, but it works.
27mm
The 1993 1.5 liter Honda gearbox is different than the 1998 1.5 liter Honda gearbox. The gearboxes are not interchangeable.
no
The vertebrae formula of an ox is C7, T13, L6, S5, Ca18-20.
4 cylinders 16 valves.
a syncro is in the gearbox, it allows it binds up with a gear to allow the gearbox speed to become the same and the gear change to be smoothe
On the side of the engine close to the firewall. Near The Oil Pump
yes
the same way you strip a girl.