is an 120 volt ac converter that we are using for 12 volts considered AC output power.
Yes, that's exactly what it's designed to do.
No. Transformers only work with AC. Tongue-voltage is DC.
You'll probably have to have a step-down transformer to take the 220vac down to 110vac. Then you'll have to have an Ac to Dc converter box to change the Ac to Dc volts. The converter will probably have an adjustable output so that you can dial in 12vdc.
You need an ac-dc converter to reduce your house voltage to 12 volts
With a AC to DC converter. You'd need to use a 115 AC to 12 volt DC converter. Connect the wires from the item you want to convert to the 12 volt positive and negative on the front of the converter. Plug the converter into a wall outlet and then turn on the switch on the converter. 115 is going into the converter but 12 volts is coming out and into the item you wanted converted.
Yep. It is called an inverter to convert 12 volts to 110 volts AC. Get one that will supply the amp needed for the microwave.
the answer is dc volts are rectified from ac volts and the amperage will be the same unless you account for the slight drop from the rectifier. dc volts from a battery have no relationship to ac volts. you can derive ac volts from a dc source using an inverter.
If you want to convert 24v AC into 12v Ac, it's simple. Just get a transformer to convert 24 volts into 12 volts. This is called a stepdown transformer. If you want to convert 24v DC into 12v DC, it's more complicated. First you have to change the 24v DC into 24v AC by a switching converter that changes DC into AC. Then you would use a stepdown transformer as in the former example. Once the 24v AC is converted to 12v AC, then you use a rectifier bridge to change the 12v AC into 12v DC.
it depand on the alternator and the RPM. Personnally, I tested a 14v 65amp yesterday and i was able to get 51volts
Since there is an AC to DC converter in there, it's hard to say. If it's a basic transformer to rectifier to capacitor design it will put out 6 volts. If it is a transformer to a voltage regulator it's hard to say what will happen. Certainly the drive voltage to the regularor will be cut in half. It may or may not run, but won't be able to run at 12 volts because there won't be any 12 volts to drive the regulator. (There will only be 6 volts.) If it is a switcher it may work fine or it may do nothing.
An AC-DC converter you can operate a device on AC instead of batteries. ~bobbyjack~ : D
Because alternating current (AC) voltage varies over time, to the positive and negative, an actual AC voltage measurement will not be the same as a DC voltage measurement. For example: 5 volts DC is 5 volts constantly, viewed over time. The average voltage is 5 volts. 5 volts AC (from zero to peak) is not actually 5 volts constantly, but varies between 5 volts and 0 volts over time. The average voltage will not be 5 volts. Using RMS AC values is designed to make AC and DC measurements equivalent, for example 5 volts DC and 5 volts RMS AC are almost identical.