No. Ribbon cables are flat and wide. The SATA cable was designed to be narrow and slightly thicker, so it would not block as much air flow in the case.
There are two types of cd/dvd drive available. Sata and Pata. Sata uses a small sata cable whereas pata uses an older ribbon style IDE cable. Sata is the best of these two but not all computer support sata, in those cases ide will do. As far as brand goes there is not much difference but the Pioneer, LG and Liteon drives tend to be reliable.
-Sata Cable -IDE Cable -Molex/Sata power cable Other possible -SCSI Cable -Floppy cable -SLI/Crossfire Cable -12V 24 pin Motherboard connector -12v 4-pin CPU Connector -12v PCI-e Connector
What is the pin number for the ribbon cable?
80
The red stripe on the ribbon cable indicates pin #1. Usually, pin #1 on the device is the one closest to the power connector.
If it's a SATA connector, in one of the SATA ports. If it's a ribbon cable (commonly called IDE cable, but that's incorrect), into the IDE connector on the Motherboard. (that's properly named)
There are two types of cd/dvd drive available. Sata and Pata. Sata uses a small sata cable whereas pata uses an older ribbon style IDE cable. Sata is the best of these two but not all computer support sata, in those cases ide will do. As far as brand goes there is not much difference but the Pioneer, LG and Liteon drives tend to be reliable.
Open the case and look at the hard disk drive. If it is connected with the gray (typically) 40 pin ribbon cable, it's IDE, if it uses the MUCH smaller SATA cable you'll be able to tell the difference.
SATA cables.
Older hard drives typically used a flat ribbon cable, known as an "IDE" or "ATA" cable. Modern SATA drives use a thick but narrow cable, usually red in color.
-Sata Cable -IDE Cable -Molex/Sata power cable Other possible -SCSI Cable -Floppy cable -SLI/Crossfire Cable -12V 24 pin Motherboard connector -12v 4-pin CPU Connector -12v PCI-e Connector
You cant connect two devices to the same sata cable.
Differences between PATA and SATA hardrive are most visible in regards to the cables. A PATA hard drive has what is called a ribbon cable which is kind of big compared to the small SATA cable. The PATA ribbon cable has 40 pins that connect to the hard drive and/or motherboard whereas the SATA cable only has 7 pins allowing for the computer as a whole to be much cooler due to more empty space inside it for air to flow more freely. Also, I believe that the SATA drives are faster than IDE or PATA, especially if it is a SATA III which can transfer at speeds up to 6 gbs/per second.
SATA, or serial advanced technology attachment, connects the motherboard to hard drives and optical drives. This cable is inserted into the SATA slot on the motherboard.
sata cable has how meny wires inside
As far as interfaces goes you have two main types SATA and IDE. SATA being the newer of the technologies and using a small plug type cable to connect to your motherboard, where as IDE uses a wide ribbon type cable to connect to a large slot on the motherboard. There are two types of SATA as well. SATA-I and SATA-II. SATA-I runs at speeds up to 150mb/s and SATA-II runs ar speeds up to 300mb/s. Most motherboards these days take SATA-II devices (Hard drives, optical drives). Hope this answers your question.
What is the pin number for the ribbon cable?