The red stripe on the ribbon cable indicates pin #1. Usually, pin #1 on the device is the one closest to the power connector.
What is the pin number for the ribbon cable?
straight cable is needed when connecting two computer periperhals. A cross over is used when connecting a computer to a network hardware (router, swirch, etc..)
No. Ribbon cables are flat and wide. The SATA cable was designed to be narrow and slightly thicker, so it would not block as much air flow in the case.
a usb cable is a cable that allows the computer to communicate with the object u are connecting it to. For example there is a computer powered fan which is connected to a computer using an usb cable
80
A ribbon cable can carry information in either direction, either in or out.
There are many cables and components to a computer. The main cables for connecting the computer would be the power cable, and an Ethernet cable for connecting a non wireless PC to the internet.
The CD ROM connects to the computer via a ribbon cable.
a cable for connecting a floppy drive to the computer motherboard.
when you are connecting same devices like computer to computer or switch to switch or router to router to use cross over cable. when you are connecting different devices like computer to switch or computer to router to use straight cable.
That would be called Ribbon Cable. It's generally used in connecting hardware, such as: CD Drives, Floppy Disc Drives, and Hard Drives. The best thing to do is search for 'PS3 Ribbon Cable' and then make sure the Ribbon Cable has the correct amount of slots at each connection of the Ribbon Cable.
A ribbon cable is a cable with many wires running parallel to each other and are most commonly used inside computers connecting hard drives, cd drives and floppy drives. Older computers used them as external connections as well.
What is the pin number for the ribbon cable?
WIRELESS
it is very kkoolll
Ribbon cables are difficult to work with and it is never a good idea to install cables on a device when it has power running to it. Components could short and be damaged or the technician could be damaged.
Data path is more in 80 ribbon cable.. The data transaction is faster than 40 ribbon cable..