0
What else can I help you with?
How many pins are there on a floppy drive cable?
There are two cables connected to the floppy drive; Power cable - 4 pins, Data cable - 34 pins.
How can you tell the difference between the hard drive data cable from the floppy drive data cable?
1. A floppy cable will almost always contain a small "twist" in it, in which a port of the wires are turned in reverse.2. A floppy cable has 34 pins. A PATA hard drive cable has 40 pins.
What is fdd data cable?
FDD cable is for floppy disk drive (FDD).
Explain how the two available drives on FDD data cable are distinguished?
Floppy data cable is 34 pin flat cable having two connectors for floppy drive. The floppy drive connected at the end connector is A: and the another connector disk is B:..
How many wires in a floppy cable?
AnswerA standard floppy drive cable in a computer has 34 pins.
A technician is troubleshooting a computer that has a malfunctioning floppy drive The technician observes that the floppy drive light remains lit constantly How should the technician attempt to rep?
the data cable connected to the floppy drive is connected in reverse.
What two cables connect to the hard disk?
There are two cables that connect to the floppy drive in a desktop computer.There is a four pin power cableThere is a ribbon cable that has a part twisted end (the twisted end connects to the floppy drive).
What happens when you install a floppy drive cable backwards?
The floppy drive data cable has a stripe denoting pin #1...PIN #1 on the FDD cable must be aligned with PIN #1 on the drive connector, or the drive will not work...This misalignment does not damage the drive, but the activity light will stay on constantly...To correct this, turn the computer off, reconnect the data cable aligning the pins correctly & reboot the computer....
Floppy drive cable is a 34-pin ribbon cable and a twist in the cable?
used on a floppy
What is common name for the data cables used on floppy?
The common name for the data cables used on floppy drives is "floppy ribbon cable." These cables typically have a flat, multi-conductor design and connect the floppy drive to the computer's motherboard. They usually feature a 34-pin connector for the floppy drive interface.
What happens of pin 1 on the floppy drive data cable is not aligned with pin 1 on the drive connector?
The floppy drive will not work. Occasionally, an improperly installed cable will damage the drive electronics, but more often, the light on the front of the drive will stay on constantly, to indicate that something is wrong.
What is an easy way to tell a current floppy drive ribbon cable from an EIDE cable?
The floppy drive cable would be about half the width than the other.
