It's all about torque.
Basically, the further away from the pivot you apply the force, the less force you need to apply.
Since the screwdriver means you can apply a force further away from the pivot (where you put the head of the screwdriver underneath the lid of the paint can), it means you can apply less force.
A long one- you can lift anything if the lever you use is long enough. =]
1. A Long screw driver with a narrow handle would be better. Depending on the blade size, if the blade was smaller that would work better.ANS 2 - They both have particular uses, and both belong in a properly equipped tool box.
I have a 'stubby' -that's a 2 " long screwdriver, and I have 2 right angled screwdrivers, the points are at 90 deg for an inch off the main shaft.
Some of them are long and some are short.
All other things being equal, short wires. Longer wires cause the voltage to drop somewhat. The thickness of the wire also makes a difference - thicker wire can handle higher current, but the short/long principal is the same.
sizeof (long) and sizeof (short) often 4 or 8 for long, and 2 for short
i think a screw into a board a long screwdriver with a narrow handle
The wider the screwdriver, the better. Longer handle will give a fling affect possibly resulting in thrown paint splatter.ANS 2 - Why not do the sensible thing and just get a paint can opening handle, available for less than a dollar at every paint store and hardware store.
Yes, the word "paint" has a short vowel sound for the letter "a". It is pronounced as /peษชnt/.
1. A Long screw driver with a narrow handle would be better. Depending on the blade size, if the blade was smaller that would work better.ANS 2 - They both have particular uses, and both belong in a properly equipped tool box.
a long one, because things are easier and you get more leverage when it is longer
Long screw driver with a narrow handle would give the most torque, therefor it would be best It would also depend on the blade of the screw driver. The blade should fit well into the slot in the screw so if the long screw driver with the narrow handle had a small narrow blade that was too small for the screw then another one would be better.
Short it's easier to manage
Umm short hair is way better but it depends on what you think
my opinion, long.
Philips screwdriver, theres about 8 screws, some long, some short.
NOOO
short hair.