answersLogoWhite

0

Yes, because if you exceed the critical angle you will be out of the acceptance angle and the light will not reflect properly and the resulting signal will not be usable.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What are the significance of acceptance angle in fiber?

as we know that we apply light ray as source instead of electricity in case of OFC (optical fiber cable) communication but not all ray will propagate so that only those rays that have an angle greater than the critical angle can be transmitted and that reference angle is called ACCEPTANCE ANGLE.


Velocity factor of a 14 awg cable?

Velocity factor depends to a large extent on the dielectric (insulation) used. You will have to specify the exact cable to answer this question.


What is the recommended length for a 50 amp RV cable for optimal performance and safety?

The recommended length for a 50 amp RV cable for optimal performance and safety is 25 feet.


What is the purpose of the cable pinch bolt and how does it affect the performance of the bicycle?

The cable pinch bolt secures the cable in place on the bicycle's brake or derailleur mechanism. It affects the performance by ensuring proper tension and alignment of the cable, which in turn allows for smooth and accurate operation of the brakes or gears.


It is not an adapter at all. This item is added to an order for an existing cable to make one end right angle?

It is not an adapter at all. This item is added to an order for an existing cable to make one end right angle


A cable car stops part of the way across an 86 m wide gorge The cable holding the car makes an angle of dapression of 97 degrees at one and a angle of depression of 40 degrees at the other end. How long is the cable that holds the car Draw a diagram?

?


What is the tension in each cable supporting the 560nassumed the angle O of the inclined cable is34.0 degree?

This is a physic guestion . The topic is force.


What do you do to reduce the strain placed on the strands of a cable during swagging?

Bend the cable to a 45 degree angle after partial insertion into the terminal


A cable is attached to the top of an 80' pole and to a stake in the ground 35' from the base of the pole What angle will the cable and the ground form?

66


A cable is attached to the top of an 80 pole and to a stake in the ground 35 from the base of the pole what angle will the cable and the ground form?

66


Is the telltale factor for ascertaining where faults in a cable lie?

Impedance.


Coaxial cable is 500 meter it has a velocity factor 0.6 how long of the cable length does it take energy to travel the full length of the cable?

14