Aluminium is ductile and has a low melting point and density.
Commercially pure aluminum is very ductile; however, aluminum 'age hardens' and becomes brittle with time.
yes, very ductile
Aluminium is ductile.
Yes, aluminium's tensile strength isn't high enough to suspend its own weight, so a steel-wire core is used.
I think you're asking what element steel is made of. It's mainly iron. It has varying amounts of carbon (that's why there's high-carbon steel and low-carbon steel), and sometimes some other elements as well, depending on what it is used for. For example, stainless steel has more than 10% chromium.
ductile is the main one type in ductile
Anti-magnetic high manganese steels are just that.
No. Ductile is that property of being shaped, rubber tends to be the exact opposite.
Aluminium conductor is reinforced by steel because it can give the strenght required to support the weight of the cable without streching the aluminium, which is very ductile. It gives a specific type of high-capacity and high-strenght cable, typically used in overhead power lines.
Low carbon steel is steel with low carbon. High carbon steel is steel with high carbon
Carbon Steel refers to various varieties of steel, hence carbon content is limited to max. 2.1%Low carbon steel: Carbon content less than 0.3%, also known as mild steel, very soft and ductile, easily machinable.Medium Carbon Steel: Carbon content varies from 0.3 to 0.5%, responsive to heat treatment, Good machinibility, good tougness and ductility properties and weldability.High Carbon Steel: Greater than 0.5%C. Greater strength as compared to LC and MC steel, accompanied with hardness, Toughness is imparted through heat treatment.Ductile Iron is essentially a Cast iron, with max. caron content upto 4-4.5%. Cast irons are generally hard and brittle in nature dur to such high carbon content. But depending upon the cooling rate the ductile iron contains carbon in spheroidal graphite form instead of flake form. This results in the formation of a ductile matrix, hence Ductile Cast Iron is relatively ductile with respect to other cast iron varieties and also it has good corrosion resistant prpoerties.
The amount of carbon in iron metal determines the strength and type of steel.Steel with low carbon is called low carbon steel and carbon with medium carbon called medium carbon steel. It is called low carbon steel if the carbon content is around 2.5 % or less. Others may be called medium or high carbon steel like that used in Die Steel of cutting tools. Generally low carbon steel are preferred if welding is adopted.
Because high carbon steel has low fluidity & low carbon steel has high fluidity.
yes high carbon steel compacts
High carbon steel is a metal.The addition of carbon makes the steel harder after heat treatment.
high carbon high chromium steel to Welding
Yes you can bend high carbon steel.
Low carbon steel, is very soft, and can be easily shaped, but high carbon steel is extreamly stong and is used for springs or high strenght wire
threads are made by high carbon steel and high speed steel. the body of die made by steel and carbon steel
There are 4 they are Low Carbon steel, Medium Carbon Steel, High Carbon Steel and Eutectiod