Using the correct procedures and filler material they can both have the same strength. P.S. both are considered "arc welding"
MIG is a non-standard term for gas metal arc welding and flux cored arc welding, according to the American Welding Society (AWS). MIG stands for metal inert gas. Inert gas being a non-reactive gas (a noble gas on the periodic table). Most GMAW procedures do not use a mixture of 100% non-reactive gas. A popular gas mixture in the United states contains 90% Argon and 10 % CO2, or 75% Argon and 25% CO2. Argon is a non-reactive gas, while CO2 is a reactive gas. The mixture is not inert, therefore, using MIG is an inaccurate way to represent the actual process being used. A mixture containing 100% of an inert gas are used when necessary. However, the preferred term is still GMAW or FCAW.
fghdskvhuidbn idvhdiuhbdfvn
Gas, arc, mig and tig.
Gas Metal Arc Welding Most folks call it MIG
MIG stands for metal inert gas. It is a non-standard term for gas metal arc welding (GMAW) and flux cored arc welding (FCAW) according to the American Welding Society (AWS). It is simply Metal Inert Gas.
It is arc welding process using a spool of wire that is fed to the material by an electric motor. Different from shielded metal arc welding which uses consumable welding electrodes with a covering of flux to assist and protect the weld. The MIG uses an inert gas (IG) to keep impurities from the welding point. The technical term for MIG is GMAW (gas metal arc welding), this is because most of the time an inert gas is not used, a mixed gas is more likely. Ex. 90-10 Ar-CO2
MIG welding works only with reversed polarity, DC+, + at the torch. The reason is mostly the stability of the arc. Using DC- will result in a very unstable arc with lots of spatter.
See preceding question re: Mig welding.
Arc welding uses an electrical current to create enough heat to melt metal. Any type of welding that uses an electric arc is technically arc welding. However, most people use the term 'arc welding' to mean shielded metal arc welding (SMAW), or 'stick welding'. SMAW, MIG, and flux core wire welding use the filler metal as both electrode and filler; TIG welding uses an electric arc to heat the base metal and a separate filler rod to add metal to the weld.
MMA stands for manual Metal Arc welding. In short "arc welding" and can be used in either AC or DC mode. Usually incorperated with Mig, Tig and plasma cutters for arc welding machines as an optional extra. submitted by Ken.Benson - Clarke. sales@edacomputers.co.uk from saffon walden, essex, uk.
Manual Metal Arc Welding(MMAW) Also GTAW (TIG) and GMAW (MIG) The MIG wire carries electric current so it is considered the electrode. TIG the Tungsten is considered an electrode.
The legth of the gas nozzle can affect the MIG welding process because it modifies the "electrode extension" or so called stickout. The longer the nozzle the longer electrode extension needed to keep the arc away from it thus the value od the welding current and arc voltage changes. These changes will have a great effect on the weld.
No, Forge welding is the simplest form of welding where two metals are heated to a state than can be forced to meld into each-other such as hammering or by other mechanical means such as a press. MIG Welding is short for Gas Metal Arc Welding (GMAW). This is a process which uses electricity to melt the parent metal and the electrode (wire) while shielded by a inert gas to keep contamination's (our atmosphere (aka air)) out of the weld puddle. Forge welding uses brute force and heat to join metals while MIG welding uses electricity and a shielding gas.
Technically speaking, MIG welding is arc welding because it uses an intensely hot electrical arc to heat and join the metal together. Usually arc welding means stick welding. The difference between the processes is the manner in which the filler metal is applied. With MIG welding, the filler metal is usually applied with a wire fed through a gun type device with an inert gas such as argon shielding the weld. Arc (or stick) welding uses a solid electrode of the same type of metal as is being joined shielded by a layer of flux. The method of welding depends on the user's skill and what is to be welded.