The 2 simplest Electrical circuits are
A series circuit has more than one resistor and gets its name from only having one path for the charges to move along. Charges must move in "series" first going to one resistor then the next. If one of the items in the circuit is broken then no charge will move through the circuit because there is only one path. There is no alternative route. Old style electric holiday lights were often wired in series. If one bulb burned out, the whole string of lights went off.
A battery can cause that; also, energy provided from some external source - as you would get in your electric outlet.
A switch is normally used to open or close an electric circuit, but it can also be used to change the flow from one circuit to another.
In order to work, all the connections must be in order. You also need a voltage source.
To establish an electric current, there are two requirements that must be met. There must be a closed conducting path that goes from the positive terminal to the negative terminal. The second requirement is to have an electric circuit for the energy to move a positive test charge against the electric field.
The term is "circuit" (from the same root as circle) An electric circuit must be uninterrupted for the current to flow. (This is why circuit-breakers are also called circuit-interruptors.)
It is a series circuit, where all the lamps (for instance) is on the same wire. If one lamp fails, the rest lamps will also go out.
The term is "circuit" (from the same root as circle) An electric circuit must be uninterrupted for the current to flow. (This is why circuit-breakers are also called circuit-interruptors.)
That is described as a circuit in series, as opposed to a circuit in parallel, in which there is more than one loop.
a circuit with all its elements as conductors and one in which electric current flows through it is called a closed circuit.It also can be conclude as when its a closed circuit its a complete circuit and electrical energy can flows
They're connected in parallel, this is so that everything connected to the circuits will receive the same voltage. Also, if everything was connected in series, if one of the components died, everything would be dead (think of christmas lights)
When checking continuity in a series circuit, you put your leads in series with the circuit or device being checked. You also make sure the circuit is deenergized and that it is open.
A parallel circuit is used in a strand of Christmas lights so that if one bulb goes out, the rest don't. A parallel circuit is also used in circuit breakers of houses. A series circuit is used in a flashlight. Everything follows one path.
Electric current can flow through a continuous path which can also be described as a closed circuit. Conversely, any break or opening in a circuit is called an open circuit. Charges can only flow through a closed circuit.
multiplies source voltage, two 12v dc batteries in series become a 24v circuit; also multiplies resistence
well current in a series circuit wont change so a voltage series is also a current series probablyAnswerYour question makes little sense. Applying a voltage across a series circuit results in current through that circuit, so what exactly are you asking?
Assuming you are talking about an AC circuit, then the total opposition to the flow of current in an R-C circuit is called its impedance (symbol: Z), measured in ohms. This is the vector sum of the circuit's resistance (R) and its capacitive reactance (XC) -each also measured in ohms.