Efficiency in terms of energy means accomplishing processes with less energy, ideally the least energy required, with a minimum of waste. Ordinarily, this means that the cost of producing energy is less. However, some methods of efficiently producing and using energy are not the cheapest in terms of the other costs involved: some would cost more to implement, and more to maintain, such as low-resistance shielded transmission lines, which could cost vastly more initially than cheaper ones and cost more to maintain and repair. It would be energy efficient but not cost efficient.
Is it's Energy Efficiency.
If it is burned - which is the way such fuels are usually used - the energy efficiency is the energy efficiency of a heat engine. The theoretical maximum efficiency is the Carnot efficiency; the real efficiency will usually be considerably less than that.
A more affordable auto mobile
If the efficiency is 91%, then work = 0.91 times watts
That is called efficiency. An efficiency of 1 (or 100%) means that all the energy is converted into useful work.That is called efficiency. An efficiency of 1 (or 100%) means that all the energy is converted into useful work.That is called efficiency. An efficiency of 1 (or 100%) means that all the energy is converted into useful work.That is called efficiency. An efficiency of 1 (or 100%) means that all the energy is converted into useful work.
The ratio between the energy efficiency of pumps and pump uses the energy that does. Pump efficiency is determined by the manufacturer. In the calculation of pump efficiency is 70%.
The length of a food chain is related to its efficiency by when it is smaller it is more efficient. This is because the energy is not being used up as quickly.
British Energy Efficiency Federation was created in 1996.
The efficiency is always less than one because some of the energy is always useless for what you want. Most wasted energy eventually turns into heat. therefore the efficiency is like a percentage with 1 being 100% a device can't be 100% efficient as some energy is wasted. To work out the efficiency of a device you need to do the total useful energy produced divided by the total energy that is inputted into the device
Efficiency cannot be greater than 100% because efficiency measures energy, and since energy is not made, only transfered (conservation of energy) then we cannot gain energy. Hence the energy out must be at most the energy in. Thus efficiency can be at most 100%
The term EFFICIENCY is defined as useful work, divided by total energy expenditure.
The "all day" efficiency of a transformer is defined as the ratio of energy out/energy in for a given all day cycle.