answersLogoWhite

0

Is georgette a synthetic fiber

Updated: 9/23/2023
User Avatar

Wiki User

10y ago

Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Is georgette a synthetic fiber
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Geometry

How do you determine content of Georgette fabric?

To determine the content of any fabric, the best suited method is the burn test. google burn test for fibers and you will get 100 of links for the same. Georgette in its original form was woven in silk but now is being done with polyester as well. Georgette is no kind of fiber/fabric, but is kind of a weaving technique. Hope this helps out..


Does ring topology uses 7-6-5 rule?

This rule does not apply to other network protocols or Ethernet networks where all fiber optic cabling or a combination of a fiber backbone with UTP cabling is used. If there is a combination of fiber optic backbone and UTP cabling, the rule is simply translated to a 7-6-5 rule.


which is better tile, vinyl or linoleum?

The main difference between vinyl and linoleum is that linoleum is made from natural products while vinyl is purely synthetic. The color of Linoleum is throughout the material, while the color is just printed on the surface of vinyl so can wear out in areas of heavy traffic.


What shape is unshaped pencil?

Pencils are cut from wood blocks and are originally either square or (less commonly) round. They are either smoothed to a ROUND shape, or milled to a HEXAGON (6-sided) shape, which reduces their tendency to roll away on a mildly slanted surface. (Thicker carpenter's pencils are oval for this reason.)Pencils made from synthetic materials (plastic, polymer) can be extruded in any shape.


How do you work out the fleet angle for a winch?

If you're designing a system for hoisting a load using a pulley and a motorized winding drum, you must space the drum and the pulley sheave apart far enough to maintain a safe "fleet angle." The fleet angle of a sheave-and-drum pulley system refers to the maximum angle from the front of a fixed sheave to the outermost position along the drum as it winds the fiber (e.g., rope, cable or wire). If the angle is too small, you'll won't be able to wind enough fiber for the system to be useful; if the angle is too large, the fiber will be pulled off the sheave's track, requiring you to shut down and repair the system.. 1 Measure the direct distance from the front of the fixed sheave to the axis of the drum (in feet).2 Measure the length of the smooth-faced drum from the center to the left edge (in feet).3 Divide the result from Step 2 by the result from Step 1. 4 Calculate the arctangent of the result from Step 3. This is the left fleet angle of the drum.5 Measure the length of the smooth-faced drum from the center to the right edge (in feet).6 Divide the result from Step 5 by the result from Step 1.7 Calculate the arctangent of the result from Step 6. This is the right fleet angle of the drum.