answersLogoWhite

0


Best Answer

Interior paint is good for the inside portion of a window frame if it is not exposed to moisture. If it is exposed to moisture one should consider using a different product.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Is interior paint good for the inside portion of a window frame?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Why does the window on a 1998 Pontiac transport go down on an angle?

the frame that holds the window in is bent and you have to change the whole inside of the door not just the frame.


The difference between new construction and replacement windows?

Replacement Windows are designed to fit inside the existing window frame once the original window sashes are removed; there is no need to remove the interior casing and exterior casing. This makes for a very neat and faster installation. New Construction windows require the entire window frame to be removed along with all interior casing and all exterior casing as well. Therefore the opening can be enlarged to create more replacement options. All the interior and exterior casing (trim) will be replaced.


What is a casement window?

A casement window is one with a frame attached to the building the window revel and inside teh frame is a secondary frame which has a hinge on the side to open the window in or out. Some are double which means to windows one hinged on the left frame the otehr on the righ frame the these open indelendantly of each other but come together when closed in the middle to stop access and draft. A sash window is one the slides up and down with a counter-weight in teh frame to hold the open window where you require it.


An horizontal beam above a door or window?

The horizontal beam above a door or window is sometimes called a lintel. This part of the door or window is a portion of the frame in most cases.


What does sills mean?

The horizontal member that bears the upright portion of a frame, especially the horizontal member that forms the base of a window.


What means sills?

The horizontal member that bears the upright portion of a frame, especially the horizontal member that forms the base of a window.


Calculate projection of a window from the exterior wall finish?

The window frame should be flush with the exterior wall cladding.If the frame is in negative to the interior wall linings,then you will need to pack out flush with those linings.The sill of the window must project past the line of the exterior cladding by at least 40mm-50mm.


What measurement is used to measure the width of a window?

Windows are measured in the usual units of the country, whether metric (millimetres or metres) or imperial (feet and inches). The part of the window that is being measured needs to be specified. It could be: * the rough opening - the width of the hole in the wall into which the window will be fitted * the frame size - the width between outer parts of the window frame * the inside reveal to inside reveal width- the width between the timber trim around the window on the inside of the wall * the daylight opening - the unobscured glass width * the sash dimension - the dimension of the opening part of the frame All these measurements have different uses and by, for example specifying only the rough opening width, the exact type of window frame does not need to be specified.


How do you make aluminum window frame?

Aluminum window frames after being squared off and matched up are riveted together. Either a glass pane is fitted inside the frame before assembly, or a screen is stretched after it is secured.


How would I go about soundproofing a window?

Replace the window with a vinyl framed "double/triple paned" glass window, available from your local hardware store. Add another window on the inside frame of your existing window. Place a sound barrier in the window frame, blocking the sound (and the light). Use acoustical drapes tove "snap-in" w block sound as they do in Hotels/Motels.


How do you remove the rear window on a 1997 Dodge Dakota?

You are going to want two people to do this its easier, but one person can do this. Pull the interior back by the rear window. On the frame you'll see two tabs on both ends at the bottum of the frame bend them straight. pull the bottum of the window out and now it hinges at the to carefuly lift up and the window is out. I did this by myself and had it resealed in an hour. Its really not that bad.


What is the best way to measure my window so I purchase the correct size window blind?

You should measure the inside of the window frame as well as the outside, take these measurements to the store and they will make sure you get the right fit.