No, it is not alright to replace a 180 watt DLP TV bulb with a 200 watt bulb. You should only use the OEM rated size/wattage for your TV.
Bulb brightness in LumensA 100 watt Bulb is rated at approximately 1700 lumensA 60 watt incandescent bulb is rated at approximately 800 lumensA 40 watt bulb is rated at approximately 400 lumensA 25 watt bulb is rated at approximately 180 lumensA 4 watt night light bulb is rated at approximately 20 lumens
A little bit less than a 25 watt incandescent bulb - the the table below:Bulb brightnessA 100 watt Bulb is rated at approximately 1700 lumensA 60 watt incandescent bulb is rated at approximately 800 lumensA 40 watt bulb is rated at approximately 400 lumensA 25 watt bulb is rated at approximately 180 lumensA 4 watt night light bulb is rated at approximately 20 lumens
180 watts
pro-grow 180's four of them is exactly 600 watts draw powder from the plug, it will give you good spread and watts.
The lumen output of the bulb should be determined by measuring the Lumens exiting the fixture that it is installed in. The reflector, lens and housing will all affect the the amount of "light" that exits the fixture to reach the space you are intending to illuminate. Bulbs will vary and Lumens will vary based upon the voltage. A typical 12V 20W Halogen bulb will yield about 180-220 lumens depending on the lens (clear vs. frosted) and the reflector type. Lumens will drop as voltage goes below 12Volts as the design voltage is specified in order to "excite" the halogen gas as it reacts with a tungsten coated filament. If the voltage isn't high enough the filament won't reach it's design temperature and the light won't burn as bright as it was designed to. a lone bulb will yield up to 280-300 Lumens with now housing, lens or fixture but it is also very dangerous due to the heat hazard.
Bulb brightness in LumensA 100 watt Bulb is rated at approximately 1700 lumensA 60 watt incandescent bulb is rated at approximately 800 lumensA 40 watt bulb is rated at approximately 400 lumensA 25 watt bulb is rated at approximately 180 lumensA 4 watt night light bulb is rated at approximately 20 lumens
A little bit less than a 25 watt incandescent bulb - the the table below:Bulb brightnessA 100 watt Bulb is rated at approximately 1700 lumensA 60 watt incandescent bulb is rated at approximately 800 lumensA 40 watt bulb is rated at approximately 400 lumensA 25 watt bulb is rated at approximately 180 lumensA 4 watt night light bulb is rated at approximately 20 lumens
It depends on how much you use the light, and how much power costs in your area. You can find out the second by looking at your electric bill... it'll give the cost per kWh (kilowatt-hour). The difference between a 40 watt bulb and a 60 watt bulb is 20 watts, meaning you'd have to leave the light on for about two days straight for the savings to be even one kilowatt-hour, and if it were on all the time in a year you'd save 180 kWh or so... almost certainly less than $20.
180 watts
1 Watt means 1 Joule per second, so 60 watts means 60 Joules per second. A light bulb that burns energy at that rate for 3 seconds uses 180 Joules.
18 gauge
180 watts
Probably about 180 watts, assuming 90% efficiency.
200 Watt Panel
For my '88 Civic, it cost me right at $180 to replace back in '97.
Would be compared to 1200 watt amp
Answer 180