Wireless ethernet adapters are very easy to install, being plug and play. Simply insert the adapter in the provided slot on the computer and update or install the necessary drivers.
Unless you actually happen to have an Ethernet adapter lying around, there is no way to install it "for free."
Your PS3 must have a wireless adapter installed if you want to connect to the internet wirelessly. Otherwise, if you don't you will have to use an Ethernet cable. If you have a wireless adapter installed on your PS3. You will need to connect it to your wireless router. Go to the wireless network menu on your PS3. Find the (SSID) network name of your network. Connect to it!
You will need the Xbox wireless adapter, an installation disc, and an Xbox. Install the software onto the machine and plug the adapter into the USD port to install.
A wireless networking card to install within your computer, or a USB wireless adapter.
An onboard LAN is a built-in ethernet adapter on mother board, if you have an onboard LAN, then, there is no need to install another ethernet card for your purpose.
Technically, wireless networking standards are part of the Ethernet family of standards, so what you're really asking about is changing from wireless Ethernet to wired Ethernet. If your computer has a working RJ45 port, all you need is an Ethernet connector cable to connect to a suitable hub or router. If your computer doesn't have that port, you need to install a wired network adapter.
You would change the wireless adapter when it no longer works or you want to use a newer standard. Sometimes you might want to install a different one when you need a longer range or want to install one that uses an external antenna.
Yes, it's. You have to purchase either a PCI wireless card (you will have to open the computer case to install it) or USB wireless adapter (which is easier to install, just put it one of usb ports).
Insert the MagicJack Plus device into the USB port on the device's power adapter. Use an ethernet cable (RJ45) to connect the MagicJack Plus to your Internet router. The ethernet cable must be plugged into the port labeled “Internet.” Connect your telephone to the MagicJack Plus using a phone cable (RJ11).
Just like you would if you were configuring a laptop or desktop computer with an internal wireless card. Don't use the "Install" disk as 98 percent of consumer wireless Routers, adapters, etc, don't need it to "set it up". It just to use the extras they have. Just get the IP number and password from the manual to access the Adapter. Any web browser should work. Configure the computer as using Ethernet and then configure the Adapter. Just hook the Ethernet cable between the Adapter and computer and just configure it like you would any other wireless computer. If you already have a wireless computer it would be easier to use that one and just copy the settings over to it. Or just look at the router settings. Follow the manual instructions as each one is different. Basially, make sure DHCP is on and you spell the the "Network Name"(SSID), "Security/Encryption" (WPA/WPA2, etc) and "Password" EXACTLY. It is case sensitive.
To hook up an XBox 360, one would need the XBox 360 Wireless Network Adapter. This specific adapter is easy to install, is compatible with Windows Vista Media Center, is compatible with 2.4 Ghz and 5 Ghz wireless networks and allows wireless play on Xbox LIVE.
The devices you need to accurately have hooked up are ethernet cords and a phone cord from your wireless device to your PC.