Wiki User
∙ 2013-04-20 21:07:08Its a bit of a job because it is held on by the same bolts as the intake manifold, and the easiest way is to remove them both, otherwise the rusted exhaust bolts holding the tubing to the manifold is the worst.
Wiki User
∙ 2013-04-20 21:07:08Drivers side of the engine in the exhaust pipe below the exhaust manifold.
In the exhaust manifold behind the engine.In the exhaust manifold behind the engine.
In the exhaust manifold on the back of the engine.In the exhaust manifold on the back of the engine.
The intake manifold is where the air and fuel mix and enter the engine. The exhaust manifold is where unspent gas and air exit the engine. In other words the intake manifold is where the engine breathes in and the exhaust manifold is how the engine exhales out.
exhaust manifold is where exhaust pipe hooks to engine!
Routes exhaust gases out of engine bay
exhaust pipe connects to the exhaust manifold, which connects to the main engine.
The exhaust manifold is the header that starts at the piping on the driver's side of the engine and runs back out to the exhaust.
Front of the engine, just below the exhaust manifold.Front of the engine, just below the exhaust manifold.
The exhaust manifold needs to have a gasket in place to help seal the juncture between the manifold and the engine. After the gasket and gasket sealer are in place, tighten the bolts for the exhaust manifold. The exhaust pipe can then be replaced on the new exhaust manifold.
Front of the engine, just below the exhaust manifold.Front of the engine, just below the exhaust manifold.
The Jeep Wrangler 2.5 liter engine intake air temperature sensor is located just above the exhaust manifold. The sensor will have to wires coming out of the top of it.