Each steel has another melting point; this temperature is approx. 1 200 0C.
Celsius is a degree measure. 1500°C = 2732°F
They are both in the 1500 degree F range.
The amount of heat required depends on the desired temperature change. For example, to raise 1500 g of water by 1 degree Celsius, it would require 1500 calories (1 calorie per gram per degree Celsius).
It depends on what steel it is.There is Carbon steel and stainless steel (And perhaps others, but these are the main divisions).Carbon steel has a melting point of 1425-1540 degree centigrade (2600- 2800 degree Fahrenheit).Stainless steel on the other hand has a melting point of about 1510 degree centigrade (2750 degree Fahrenheit).== == Steel often melts at around 1370 degrees C (2500 °F). This varies depending on the specific steel alloy. The specific heat of steel varied from 420J/KG/Deg C at room temperature to 720J/KG/Deg C at 1535 deg C. This equates to a theoretical heat requirement of approximately 375KWh/mt to melt steel from room temperature. In practice, foundries use between 500 and 800 KWh /mt to raise steel to a little above its melting point of 1535deg C.
1500 Degree kelvins that means 1230 c
1500 degrees Celsius is equal to 2732 degrees Fahrenheit.
1500 degrees Celsius = 2,732 degrees Fahrenheit.
1,500 degrees Celsius = 2,732 degrees Fahrenheit.
1500 m/s to be more accurate it is 1550.744 m/s st 25 degree Celsius
According to my welding book. The ignition temperature of steel is 1500 degrees Fahrenheit (816 degrees Celsius)
1500 degrees Celsius is equivalent to 2732 degrees Fahrenheit.
Yes, my welder welds galvanized steel to black steel all the time. Welding galvanized steel to black steel is a common practice. Glavanized is nothing more than steel coated with zinc at 900 degree C; temperature at which zinc melts. However, welding temperature is around 15000 to 30000 degrees ( zinc will vaporize at 1500 degrees), causing the zinc around the weld to vaporize. Correct way to approach this problem would be to use a half coupling, half nipple, or thread o let on a threaded glavanized pipe then welding the otherend to straight steel.