The answer will depend on where in the world you live and the local adopted electrical code.
In the US, generally yes, 220V branch circuits are legal. Most electric ranges, electric water heaters and house air conditioning units require 220 (actually nominal 240) volts, and are fed from a branch circuit.
There are limitations and exceptions. For instance, the NEC ( 210.6(A) ) limits the following branch circuits to 120 volts nominal:
In dwelling units, guest rooms or guest suites of hotels, motels and similar occupancies, the voltage shall not exceed 120 volts, nominal, between conductors that supply the terminals of the following: 1. Luminaires (lighting fixtures) 2. cord-and-plug connected loads 1440 volt-amperes, nominal, or less or less than 1/4hp.
NEC (2005) article 210.6 covers branch circuit voltage limitations.
The current will remain in a 220 volt circuit as long as the circuit load remains in the circuit and the circuit remains closed.
Yes, the 265 volts is just the maximum the appliance can handle. You can use it on a 240 volt circuit.
Yes, Electrical supply stores usually carry them
4 AWG copper or 2 AWG aluminum.
Mine was 220 and I suppose they all are.
The current will remain in a 220 volt circuit as long as the circuit load remains in the circuit and the circuit remains closed.
Can you supply three 220 -240 volt 16.6 amp infrared heaters with one circuit?
NO - that is dangerous.
No. You need to rewire the circuit from the electric panel.
# 3 gauge
No. The capacitor will short out and possibly explode. On the other hand, the 440 Volt Cap can be used in a 220 Volt circuit.
With a 12 volt battery charger that is made to plug into a 220 volt circuit.
Yes, the 265 volts is just the maximum the appliance can handle. You can use it on a 240 volt circuit.
Yes, Electrical supply stores usually carry them
4 AWG copper or 2 AWG aluminum.
Mine was 220 and I suppose they all are.
the 220 volt bulp in 220 volt ac current