We don't think so.
The definition of torque is (strength of the force) x (distance of the force from the axis).
It's going to be pretty difficult to evaluate that quantity if the axis isn't specified.
Not at all possible. Torque defined as the moment of the force about a point or an axis of rotation. Torque tau vector = radius vector x Force vector. Radius is to be measured only from a given point or given axis. Hence axis in very important
General formula used to calculate torque from power is torque=power*9.55/rpm so,using your data,50=500*9.55/N(rpm) i.e.,N(rpm)=95.5rpm. Angular Velocity=3.147*d*N/60 Unless the diameter is unknown its not possible to calculate the angular velocity.Once diameter is known it can substituted in the above mentioned formula.
if large force is applied keeping the minimum moment arm then it produces a very small torque or even no torque.
Torque is the product of (force) x (distance from the center of rotation).So with a distance from the center that's large enough or small enough,any force can produce as much or as little torque as you want.
Torque is the product of force and displacement T=fxd= fdsin (fd) you can increase T by increasing d and/or the angle (fd).
without specifying the force its not possible to find the torque.
Not at all possible. Torque defined as the moment of the force about a point or an axis of rotation. Torque tau vector = radius vector x Force vector. Radius is to be measured only from a given point or given axis. Hence axis in very important
Not at all possible. Torque defined as the moment of the force about a point or an axis of rotation. Torque tau vector = radius vector x Force vector. Radius is to be measured only from a given point or given axis. Hence axis in very important
how to calculate hydraulic motor torque
Measure the rpm & calculate the torque as power divided by angular velocity
Torquing head bolts without a torque angle meter is substantially harder than with one but it is very much possible. All it requires is keeping a steady hand and a keen eye on your work.
how to calculate hydraulic motor torque
To calculate brake torque, multiply force with the distance from the point of rotation. Force is equal to the torsional reaction caused by the brakes, and is also equal in magnitude to the torque exerted by the road.
how calculate power gearbox output
It is possible, but the torque converter, computers are different.It is possible, but the torque converter, computers are different.
If you know the torque, you can calculate the HP.
Torque is defined as force multiplied by the distance, from the axis of rotation, at which such as force is applied.In the case of an engine, I believe the torque would have to be measured.