Now you wouldn't want isa on your motherboard. isa is a very old and outdated standard that is rarely if ever seen any longer.
Any hardware that is still isa is so out of date and slow, it would seriously degrade the performance of your computer and should be replaced.
//edit//
The reason you would want both ISA and PCI expansion slots are because they are replaceable. If one burns out, you can replace it instead of replacing a whole motherboard.
Now you wouldn't want isa on your motherboard. isa is a very old and outdated standard that is rarely if ever seen any longer. Any hardware that is still isa is so out of date and slow, it would seriously degrade the performance of your computer and should be replaced. The reason you would want both ISA and PCI expansion slots are because they are replaceable. If one burns out, you can replace it instead of replacing a whole motherboard.
The problem is that there is only one expansion slot opening available on the back of the case. With this type of expansion slot you must choose whether you want to use an ISA card or a PCI card. You can't use both. That's the reason it's called a shared PCI/ISA slot. This is a good place to use a modem, since modems are available on both ISA and PCI expansion cards. Notice that the modem has its own speaker. When you connect to the Internet and hear the modem dialing, it's this speaker that you hear those sounds coming from. Modems convert a computer's digital data into analog waves, so that it can travel through the telephone lines to another computer. The other computer's modem then converts these analog waves back into digital data, so that the other computer can understand it. Modems are rated by how many bits per second that they can receive data. They normally send data at a slightly lower rate, which is around 48Kbps, (or 48,000 bits per second), for a typical 56Kbps modem. Just because a modem is rated at 56Kbps does not necessarily mean that it will be able to receive data at that speed. Phone lines and your Internet service provider also play a big part in how fast your computer is able to receive and send information via the Internet. Some phone lines are only capable of transmitting data at 28.8k. For this reason, even though Internet service providers usually offer a 56K connection, you can only access the Internet at whatever speed your phone lines will permit.
Yes. ISA and PCI slots were found on the same motherboard for many years. ISA slots were eliminated from motherboards around 2000, since not having one was one of the requirements for Windows 2000 certification. it is still possible to purchase motherboards with ISA slots using modern chipsets and processors, but these are usually fairly expensive (over $350 apc) and used mainly for industrial or scientific equipment.
The main reason is for compatibility between old (ISA) and newest (PCI) technologies.
As the motherboard has only two expansion slots, both PCI, your options are rather limited. You would need to purchase a PCI graphics card, which probably isn't worth the money.
Don't Disturb Yourself, You Can Purchase a Riser Card... For More Questions On Both Hardware & Software To Be Answered, My Identity On Facebook Is Daniel Azeez... On My Profile, I Am a Computer Instructor
The motherboard is the most complicated of all components inside the computer. It contains the processor (CPU) and accompanying chipset, real-time clock, ROM BIOS, CMOS configuration chip, RAM (Ramdom Access Memory), system bus, expansion slots, jumpers, ports, and power supply connections. All components of a computer connect to the motherboard. The motherboard you select determines both the capabilities and limitations of your system.
No, unless you want more memory and have exceeded the amount that one slot is able to carry
No DDR and DDR2 Slots are differant on Motherboard so cant replace each another
You can identify a motherboard by the position of the CPU, along with the power connectors used. For instance, older baby ATX boards have the CPU positioned directly behind the PCI expansion slots. This can prevent proper seating of the expansion cards, and possibly over-heating to the CPU. The later full ATX (which is also the most common) now a days, but not the latest (BTX is the latest), has the CPU seated away from the expansion slots to provide more room and better ventilation within the computer case. Full ATX use a P1 power connector. P1 has a 20-pin connector that connects to a 24-pin P1 connector on a motherboard (ATX). While the older AT boards and Baby ATX both use P8 & P9 connectors. Sometimes these connections will be marked as "P1" or "P8" & "P9". The P8 connector provides 12volts of power, while the P9 provides 5volts. The later P1 connector added an additional 3.3volts to the already existing technology. This is a logical approach, as P8 & P9 are not combined, while the P1 was introduced combined.
Yes, the motherboard is where all of the parts of the computer connect. The processor directly plugs into your motherboard. The processor is what basically runs your computer. The motherboard also distributes power to the computer and normally supplies your graphics and sound cards. Without a motherboard a computer cannot run
A fatherboard can be plugged into a motherboard. They can both support one or more child boards. Two motherboards can be connected with a special adapter. Fatherboards can fit directly together, but only when one is placed backwards.
There is no such motherboard out on the market today. All of the motherboards out on the market today either have 1 AGP slot, or PCI-Express slots. None of today's motherboards are specially equipped with both types. If you do find a motherboard that has both, you will be paying extremely big bucks for it. I don't think that today's motherboards are able to handle all of the information that an AGP and a PCI-Express slot together. Then, if and when you do find a motherboard that has both of those slots, it probably won't be compatible with the socket type of the Pentium processors. You'll probably have to use one of the higher end AMD processors (i.e. AMD's Athlon 64 FX series).
I have this motherboard with 1GB RAM but it is DDR. If a Motherboard supports DDR it cant support DDR2.
Both
No, it is not possible to substitute an AMD processor for an Intel processor on the same motherboard. The two processors use different types of mounting sockets, so they are incompatible. It would be akin to trying to put an alternator from a Ford into a Toyota. If you want to move to AMD, you would need to replace both the processor and the motherboard, possibly the RAM as well (depending on whether the new motherboard uses the same speed and type of RAM as the old motherboard).