Answer: Its not a simple job to power windows and locks. you can buy aftermarket door lock kits from many different retailers but usually unless you get them installed professionally the warrenty is void and they probably wont work properly. as for the power windows, you would be quicker and cheeper just to get a whole new door assembly. but make sure that the year of car you drive came with those options to begin with, or else your just wasting your time
yes aftermarket kits are available the electrical components are already in the door
No Willow Doesnt Have Dread Locks
Remove the power locks and windows fuse you will loose power for your windows also
Key combination [Windows+L] locks Windows XP.
Remove the relay or fuse for the door locks.
Key combination [Windows+L] locks Windows XP.
When removing the door panel, you need to remove all of the screws first. Then pull the door panel off. There should be screws around the edges or the door panel, and 1-2 screw on the door handle(on the inside). Then pop the door panel off, if the blazer has electric windows and locks you have to disconect them first, if it doesnt have power locks and windows, you have to take the window crank off,there should be a screw in the center of that. Unscrew the door lock and pull up. If it doesnt have them locks then you have to disconect it from inside the door panel
It doesnt matter
First check for a blown fuse. Check to see if there is power at the motor. If there is power at the motor then the motor itself is bad.
Try the fuse.
The fourth fuse in the interior fuse panel controls the power windows and locks on 2000-2001 Grand Prix. 25 amp silver fuse.
if the master switch is broken none of your windows or locks will work you can find one at a local auto wreckers