yes it is
YEAR 1990
10 in 10 ex
The good old 4G63, or like me a 4g64/w 4g63 head. higher stroke 100mm vs. 88mm i believe.
The 1995 Mitsubishi Eclipse is the second generation model. The US version had a Chrysler 420A engine, and the Europe version a Mitsubishi 4G63 engine.
Yes, but only from the same generation.
ny 4g63 motor out of eclipse another talon or a Mitsubishi l200 truck
Usually yes but you have to cross reference the model types to see if they have the 4g63 or the 420a motor
the number one cylinder on a Mitsubishi eclipse 4g63 will be closest to you cam gears. on the far right of the valve cover
The harmonic balancer on Mitsubishi engines is located as an integral part of the crank pulley (I have experience with the 90-99 4G63 inline-4 Mitsu engines; other engines by this marque may differ).
drain the coolent remove timing belt.....loosen bolts....4g63, take off accessory belts and remove
The Mitsubishi 3000GT is primarily designed to accommodate the 3.0L V6 engines, specifically the 6G72 and its variants. While some enthusiasts have successfully swapped in other Mitsubishi engines, such as the 4G63 found in the Eclipse, these modifications typically require significant custom work and are not straightforward. Therefore, while it’s possible to fit other engines, the 3.0L V6 is the most compatible option for a direct fit.
MOST ARE NOT-however not all, you need to know exactly which engine version you have. There are about 7 possible engines that year-here are most common/likely. 4G64 is an interference motorlike the 4G63,and 4G69 however, the early 8-valve 4G64 is a non interference engine.