Yes, because all manufactures figure in a minimal safety factor in order to pass UL code for people who don't follow recommended applications.
<<>>
A 130 volt bulb will not be as bright as a comparable bulb of the same wattage on 120 volts. Traffic signal light bulbs have a 130 volt rating. Used on 120 volt systems the bulbs last much longer because that are rated for a higher voltage. This bulb will gradually be replaced by LED lamps which have a much more significant life span.
Yes. The bulb will last longer but will also burn dimmer and be less energy efficient.
Yes you can as long as it doesnt have a a higher wattage or voltage
Yes, you can.
Yes, for about .1 second, then it will blow the lamp. A 9v battery will however light three 3.5v lamps.
12 volts is enough for a 12-volt 100-watt light bulb. It would not be enough for a 120-volt or 240-volt bulb.
If the lamp bases are the same for a 220 volt bulb and a 110 volt bulb, then yes. If any modification to the pendent lamp have to be done then no, as field modifications to electrical equipment will null and void the certification that the manufacturer had to obtain to be able to sell the device.
If you want your bulbs to last longer then use 130 volt bulb on a 120 volt system. The light emitted by a 130 volt bulb, when comparing it to a 120 volt bulb, will be a bit dimmer.
Using a 120 volt bulb in a 130 volt socket may cause the bulb to burn out more quickly or not function properly. The higher voltage from the socket can lead to a higher current flowing through the bulb, which can damage it or cause it to fail prematurely. It is always best to match the voltage of the bulb with the voltage of the socket for optimal performance and safety.
Yes, it can be connected safely but the lamp will not emit any light.
Yes, for about .1 second, then it will blow the lamp. A 9v battery will however light three 3.5v lamps.
12 volts is enough for a 12-volt 100-watt light bulb. It would not be enough for a 120-volt or 240-volt bulb.
Yes, as long as it has a filament for producing light for example a Tungsten Halogen Lamp, normal Incandescent or GLS lamp. If the lamp is rated at 12v it will run on either 12vac or 12vdc.
Using a 120 volt bulb in a 130 volt socket may cause the bulb to burn out more quickly or not function properly. The higher voltage from the socket can lead to a higher current flowing through the bulb, which can damage it or cause it to fail prematurely. It is always best to match the voltage of the bulb with the voltage of the socket for optimal performance and safety.
No, the bulb would last about 5 seconds... if that.
no , it will burn out
If the lamp bases are the same for a 220 volt bulb and a 110 volt bulb, then yes. If any modification to the pendent lamp have to be done then no, as field modifications to electrical equipment will null and void the certification that the manufacturer had to obtain to be able to sell the device.
Yes, the voltage listed on the bulb is the nominal voltage and it will work perfectly on a 120 volt circuit.
Yes. A 60W bulb has a higher resistance than the 40W buld. The extra resistance requires more current to light up the bulb. The fillament then glows brighter.
If you want your bulbs to last longer then use 130 volt bulb on a 120 volt system. The light emitted by a 130 volt bulb, when comparing it to a 120 volt bulb, will be a bit dimmer.
It depends on the size and wattage of the light bulb. In general, a regular household light bulb would require more than one 1.5 volt battery to light up, as most standard household light bulbs operate on higher voltages (typically 120 volts in the US).