NO!!!!! Use a Dry Chemical extinguisher
NO!!!!! Use a Dry Chemical extinguisher
you should use dry powder extinguisher
Yea the water conducts the electricity through the stream. The best way to put out an electrical fire is with a class c extinguisher. However, fixed water mist extinguishers ARE used on high-voltage systems, with enough clearance to avoid arcing, where the safe design is done according to NFPA 750 Standard on Water Mist Fire Protection Systems.
Water and electricity generally do not mix very well. Impurities in ordinary tap water help make it a good conductor of electricity. Using a water fire extinguisher on an electrical fire will almost always present a major shock hazard and should never be considered. That being said there is a "special" type of water fire extinguisher that can be used on electrical fires, but it uses purified distilled water and a special nozzle that disperses the water in tiny beads. To be safe, unless you know what type of extinguisher you have and what it is used for, it is best to evacuate the area and call the fire department. it makes big sparks
Electrical fires should not be extinguished with water, as it can conduct electricity and increase the risk of electrocution. Instead, electrical fires should be put out using a Class C fire extinguisher or by cutting off the power source if safe to do so.
Because it is dangerous to use water to extinguish a fire involving electrical equipment. The water can conduct electricity to the person fighting the fire and electrocute them. One should use dry powder on electrical fires.
To safely extinguish a metal fire using a fire extinguisher, follow these steps: Use a Class D fire extinguisher specifically designed for metal fires. Stand at a safe distance from the fire and aim the extinguisher nozzle at the base of the flames. Sweep the extinguishing agent back and forth across the fire until it is completely out. Do not use water or a regular fire extinguisher on a metal fire, as it can make the fire worse.
The function is to fight a fire which will either extinguish the fire or to fight it long enough to allow safe passage from the location - The main and most important is to use the correct extinguisher and to leave the area if the extinguisher is not impacting on the fire.
No, throwing flour on a fire is not a safe way to extinguish it. Flour is flammable and can actually make the fire worse. It is recommended to use a fire extinguisher or water to put out a fire.
To refill a fire extinguisher, you should take it to a professional fire equipment service company. They will empty the extinguisher, check for any damage, refill it with the appropriate extinguishing agent, and ensure it is properly pressurized. It is important to have a trained professional handle this process to ensure the extinguisher is safe and effective in case of a fire.
For a grease fire, use a fire extinguisher specifically labeled for grease fires or smother the fire by placing a metal lid over the pan. For an electrical fire, turn off the power source if safe to do so and use a Class C fire extinguisher. For a wood or paper fire, use a Class A fire extinguisher or water to extinguish the flames.
After pulling the pin on a fire extinguisher, aim the nozzle at the base of the fire from a safe distance. Squeeze the handle to release the extinguishing agent, and use a sweeping motion side to side to cover the area of the fire. Continue until the fire is completely out or until you are sure it is safe to leave the area. Always ensure you have a clear escape route when using a fire extinguisher.