Want this question answered?
The kinds of simple machine are: Lever, Inclined Plane, Wheel and Axle, Screw, Wedge, Pulley. Lever is a rigid bar that turns or pivots on a fired point called fulcrum. It is used to push, pull or lift objects using less force. Inclined Plane is a ramp or scope that reduces the force you need to exert in lifting something. Wheel and Axle is a device in which a small wheel is attached at the center of a larger wheel. Screw is a inclined plane wound around a post. Wedge is used to cut, split or divide objects.It is made up of 2 inclined planes put back to back to form a sharp edge. Pulley is used to raise and to lower objects.It is a grooved wheel that turns on an axle and acts as lever, a simple machine which consist of small wheel with groove on a rope.
The Inclined Plane is made out of any material that is positioned at an angle to a surface.
inclined plane
To identify a simple machine, determine how it develops its mechanical advantage.If the MA comes from the load traveling along the length of an inclined surface to reach a higher height, then the machine is an inclined plane. If the central axis of a helical shape is made to rotate, and because of that rotation a force applied by the helix causes a nut to move along the axial length, or causes the helix to advance through the nut, then the helix is a screw.So if an ant crawls along the thread of the anchor bolt of a streetlight the ant is using that "screw" as an inclined plane. If a giant grabbed the helical ramp of a parking garage, and turned it until it had forced its way into the ground, the giant would be using the garage's parking "ramp" as a screw.The type of machine is identified by how it is used and how it develops its mechanical advantage, not simply by its size or vernacular name.
They are both the same because they are divided by the length of incline or screw to get the correct answer.
A stapler is a compound machine. It is made up of a lever and a wedge.
The kinds of simple machine are: Lever, Inclined Plane, Wheel and Axle, Screw, Wedge, Pulley. Lever is a rigid bar that turns or pivots on a fired point called fulcrum. It is used to push, pull or lift objects using less force. Inclined Plane is a ramp or scope that reduces the force you need to exert in lifting something. Wheel and Axle is a device in which a small wheel is attached at the center of a larger wheel. Screw is a inclined plane wound around a post. Wedge is used to cut, split or divide objects.It is made up of 2 inclined planes put back to back to form a sharp edge. Pulley is used to raise and to lower objects.It is a grooved wheel that turns on an axle and acts as lever, a simple machine which consist of small wheel with groove on a rope.
The Inclined Plane is made out of any material that is positioned at an angle to a surface.
Levers, Pulleys, Wheel & Axle, Inclined Planes, Wedges, and Screw.
Levers, Pulleys, Wheel & Axle, Inclined Planes, Wedges, and Screw.
Well, part of physical science is simple machines and compound machines. The simple machines are the gear, screw, wedge, lever, pulley, and wheel and axle, and inclined plane. A bicycle is a compound machine. It is made up of the wheel and axle, gear, pulley, and lever. so it corresponds with that part of PHYSICAL SCIENCE. Hope this answer helped!!!
No. A stapler is considered a compound machine since it is made up of more than one simple machines - the lever and the wedge. Some internet sources include the inclined plane and wheel and axle.
A wheelbarrow is made up of:1) Two levers (The handles)2) A wheel and axle3) you may also roll it up An inclined planeA wheelbarrow is an example of a class 2 lever and a wheel and axle.A wheel and axle
the wheel and axle is a simple machine made from two circular objects and are different sizes that are attached and rotate together and it is a lever that can rotate to 360 degrees
A simple machine is one of the basic machines that others are made of. The six simple machines are: lever, wedge, screw, pulley, wheel & axle, and inclined plane. See attached website (aimed at children) for more information and some activities.
A simple machine is one of the basic machines that others are made of. The six simple machines are: lever, wedge, screw, pulley, wheel & axle, and inclined plane. See attached website (aimed at children) for more information and some activities.
wedges